This commit concentrates on remembering what parameters
where used for the last snapshot (the actual source, not
the formatted one), thus - the parameters passed to
rawSnapshot() - and then shows this snapshot as if it
was just made whenever the UI parameter selection matches.
The result is that the user can make a snapshot, save
it (for example) to their harddisk and then change the
destination and upload the same thing as snapshot.
The code tries hard to make this possible by automatically
adjusting the UI parameters to match every time the destination
is changed PROVIDED it was already saved or uploaded before.
If a snapshot wasn't saved and one changes destination
then this currently doesn't happen (by you could manually
make the parameters match, and still upload it). Also, if
the resolution is changed for a particular destination then
it won't automatically adjust it again.
Obviously, snapshots are no longer refreshed when changing
destination etc. You have to explicitly click "Refresh
Snapshot" before the last one is deleted / replaced.
The Debug Setting variables reflect the (last) manual choices
in most cases (set in the onCommit functions). If such a choice
is not allowed for a different destination then the UI is
changed to reflect the current behavior and the checkbox is
disabled so the user can't change it anymore. Then, if they
change destination back - the Debug Setting variable is used
to remember their last preference. A new Debug Setting has
been added for this purpose: SnapshotLayerType (colors or depth).
The old mSnapshotUpToDate has been removed and replaced with
mShowFreezeFrameSnapshot. The old getSnapshotUpToDate() now
returns something else (than mShowFreezeFrameSnapshot), namely
whether or not the current raw snapshot was taken with the same
parameters as are currently set in the UI.
The unused functions getImageAspect() and getAspect() were
removed.
mCurImageIndex has been deleted. Index 0 now means "the last
snapshot" and index 1 is temporarily used for the Falling Away
animation.
mDataSize was renamed to mFormattedDataSize.
The size spinner arrows are now disabled too whenever the spinner
edit field is disabled.
A bug in Freeze Time was fixed, where avatars would still
rotate around their axis in place (and without that their
attachments moved!)
Pressing ESC would return keyboard control to "walking"
for the own avatar with the above as result for the own
avatar. We now intercept ESC and use it (in Freeze Time mode)
to return to the cammable preview when a 2D preview was
being shown.
* Added a radio button for "Post to my.secondlife.com feed"
* Moved the snapshot to the top of the floater.
* Increased the size of the snapshot to match the size used in V3
(floater is only 4 pixels wider though).
* Disable the "Temporary upload" checkbox when the Destination isn't the
inventory.
* Update the shown Upload Fee to L$ 0 if temporary is checked.
* Added a size chooser for the Feed destination, using exclusively
preset sizes with an aspect ratio of 4:3.
* Added two new preset sizes: 1024x1024 for texture uploads, and
1680x1050 for save to disk.
Adds finding and using libjsoncpp. Note that the old cmake file
found libjson, not the same thing.
Adds Debug Setting WebProfileNonProductionURL (next to already existing
WebProfileURL) to mimic V3's behavior and use a different URL for aditi.
These Debug Settings are using by (the new) getProfileURL() (copied
from V3 with just a minor fix).
Adds HippoGridInfo::isInProductionGrid() next to the existing
LLViewerLogin::isInProductionGrid that always returned true.
The former should only be called SL grids and then only returns
true for agni (and false for aditi et al). The latter was changed
to now always return true except on SL when the grid isn't agni.
The first is used for SL-only cases, the latter for things like
colors and for godmode decision logic.
V3's llwebprofile.cpp was fixed to compile on singu, with only real
difference that I dropped the Content-Type headers for the GET methods.
Adds a std::map for hostname (or urls) --> PerHostRequestQueue
objects. The latter keeps track of the number of added curl easy
requests and decides if a new request should be throttled or
not, as well as provides the queue to queue throttled requests.
At the moment CurlConcurrentConnectionsPerHost is set to 16,
because things really don't work without LL supporting connection
reuse if we limit it to 2. CurlConcurrentConnectionsPerHost is
also set to non-persistent so that we can easily change it in the future
(once we decide on it's final value it can be set to persistent).
Moved CURLOPT_ENCODING from CurlEasyRequest::setPost_raw, and
CURLOPT_SSL_VERIFYPEER and CURLOPT_SSL_VERIFYHOST from
CurlResponderBuffer::prepRequest, to LLURLRequest::configure,
enabling the debug setting NoVerifySSLCert for the latter
two to work as follows: old behavior if "NoVerifySSLCert"
is not set, and check neither if it is set. However, if
the (new) bool mIsAuth is set the behavior of LLXMLRPCTransaction::Impl::init
is used. This is so in a next commit we can replace
LLXMLRPCTransaction with LLURLRequest: LLXMLRPCTransaction::Impl::init
will be removed. For the same reason, when the new boolean
mNoCompression is set then CURLOPT_ENCODING is set to "identity",
otherwise the old behavior (of clearing it) is used.
Introduces AIHTTPTimeoutPolicy objects which do not just
specify a single "timeout" in seconds, but a plethora of
timings related to the life cycle of the average HTTP
transaction.
This knowledge is that moved to the Responder being
used instead of floating constants hardcoded in the
callers of http requests. This assumes that the same
timeout policy is wanted for each transaction that
uses the same Responder, which can be enforced is needed.
I added a AIHTTPTimeoutPolicy for EVERY responder,
only to make it easier later to tune timeout values
and/or to get feedback about which responder runs
into HTTP errors in debug output (especially time outs),
so that they can be tuned later. If we already understood
exactly what we were doing then most responders could
have been left alone and just return the default timeout
policy: by far most timeout policies are just a copy
of the default policy, currently.
This commit is not finished... It's a work in progress
(viewer runs fine with it though).
Updated AntiSpam with documentation, safety measures, and better presentations and clarifications for the end-user from FS.
If it looks like something was removed from an xml, it was just moved to fall into place better with v-d.
Corrected log end message being log start message.
Conflicts:
indra/llcommon/CMakeLists.txt
indra/llmessage/llcurl.cpp
indra/llmessage/llcurl.h
indra/llmessage/llhttpclient.cpp
indra/llmessage/llhttpclient.h
indra/llmessage/llpumpio.cpp
indra/llmessage/llpumpio.h
indra/llmessage/llurlrequest.cpp
indra/llmessage/llurlrequest.h
indra/newview/hipporestrequest.cpp
indra/newview/llappviewer.cpp
indra/newview/llspatialpartition.cpp
indra/newview/llviewermedia.cpp
indra/newview/llxmlrpctransaction.cpp
Conflicts resolved by choosing curlthreading2
for any llmessage file regardless (which looks
correct upon investigation); the rest also
turned out to need to use curlthreading2, except
in one line where I added a semi-colon after
an assert(), and the assert was changed in
singu/master.
AntiSpamNotify setting to turn off notifications, which seemed to become a new form of spam, otherwise.
Add tool_tips to UI explaining how to make the system less sensitive.
Made defaults for antispam a lot less sensitive, so users used to the old antispam defaults won't likely need to configure the new panel.
Pull in license from NaCl... (Why wasn't it already there, Ruby?!)
Fixed spaces being where tabs should be...
Added in selective Dialog disabling, instead of just all, nice little feature in itself.
Potentially fixed a bug where sounds would be blocked when they shouldn't be... but, if this still happens, I'll put in a debug setting to disable sound antispam.
Conflicts:
indra/llcommon/llstring.cpp
indra/llmessage/llcurl.cpp
indra/newview/llviewertexturelist.cpp
indra/newview/viewer_manifest.py
install.xml
Resolved:
indra/llcommon/llstring.cpp :
two different ways to work around compile error.
indra/llmessage/llcurl.cpp :
this file is no longer used.. I deleted huge
parts to mark that I implemented that. Siana
apparently made a few changes in those parts.
indra/newview/llviewertexturelist.cpp :
manually copied patch. Mine also removed trailing
spaces, keeping that.
indra/newview/viewer_manifest.py:
Collision with changes from Liru, which have been
ignored (kept siana/master).
install.xml:
Collision with an earlier screw up. I kept the
fix from siana/master.
Conflicts:
indra/llmessage/llcurl.cpp
indra/llmessage/llcurl.h
indra/newview/app_settings/settings.xml
indra/newview/llappviewer.cpp
indra/newview/llmeshrepository.cpp
Resolved:
indra/llmessage/llcurl.cpp:
Basically removed (not used anyway)
indra/llmessage/llcurl.h:
Basically removed (just includes aiculr.h now)
indra/newview/app_settings/settings.xml:
CurlUseMultipleThreads was remvoved.
CurlMaximumNumberOfHandles and CurlRequestTimeOut
are still in there, but unused at the moment.
indra/newview/llappviewer.cpp:
CurlMaximumNumberOfHandles and CurlRequestTimeOut
are unused at the moment.
indra/newview/llmeshrepository.cpp:
Lock mSignal always (is unlocked inside wait()).
Use mSignal lock to see if we are waiting; remove mWaiting.
Return false from the MeshFetch functions iff we have to retry
a HTTP fetch. Catch the error exception thrown by getByteRange
instead of using it's return value (always returns true
anyway).
