If a newly started thread immediately exits then m_running would
immediately be set to false again and the caller would be stuck
waiting for m_running to become true forever.
Since a mutex for synchronizing startup already exists we can
simply move the while loop into it.
see also: #5134 which introduced m_start_finished_mutex
Since b2eb44afc5, a texture defined as
`[combine:16x512:0,0=some_file.png;etc`
will not be sent correctly from a 5.5 server to a 5.4 client due to the
overeager detection of unsupported base modifier `[` introducing a
spurious `blank.png^` before the modifier.
Fix this by whitelisting which base modifiers can be passed through
unchanged to the client, and prefix `blank.png` for the others
(which at the moment is just [png:, but the list may grow larger
as new base modifiers are added.)
Stop scaling images to POT immediately when loaded. The 'combine'
modifier hardcodes X and Y coordinates, and so behaves incorrectly
if applied to a scaled image. Images emitted by generateImage()
are already scaled to POT before being used as a texture, so
nothing should break.
The dynamic shadows are yet not in the desired state to justify the
inclusion into version 5.5.0. A stable release is long overdue, hence
this allows fixes to continue in 5.6.0-dev to finally release an
acceptable version of the dynamic shadows feature.
Reverting this commit is highly recommended to proceed in development.
When mods were toggled by double-click, the hard dependencies were no longer enabled automatically.
However, the 'Enabled' checkbox did still work. This commit restores the behaviour as seen before commit c401a06
Supporting these is not reasonable anymore and effectively we didn't
do that anyway, brokenness was only noticed by chance and a PR to restore
support for gcc 5.x is ready now.
fixes:
* Switching between games does not immediately hide creative mode / damage buttons if so specified
* World creation menu has a game selection list even though the menu already provides a gamebar
* Showing gameid in world list is unnecessary
* Choice of mapgen parameters in menu persists between games (and was half-broken)
Fix HTTPFetch caller and request ID to 64 bits
Check that allocated caller ID is not DISCARD
Print body if serverlist request returns error
Don't print control characters from HTTP responses
Document special HTTPFetch caller IDs
Allow unicode to be printed
This fixes a nullptr dereference when the specified inventory list is not known.
Happens when HUD elements are sent before the required inventory list is created.
It's likely that these could be used trick mods into revealing the insecure
environment even if they do everything right (which is already hard enough).
This ensures that no overflows (side-effects) happen within the find_nodes_in_area function by limiting coordinates like done in the map generation code.
Fragment color for nodes is now calculated from:
* Texture color, highlighted by artificial light if present (light color conveyed via vertex color).
* Texture color highlighted by natural light (conveyed via vertex color) filtered by shadow.
* Reflected day/moonlight filtered by shadow (color and intensity), assuming some portion of the light is directly reflected from the materials.
The length check used < rather than <=, disabling the check when the formspec version
matches the client's FORMSPEC_API_VERSION.
Additionally, it was possible to have fewer parts than required if the formspec version
was greater than the client's FORMSPEC_API_VERSION.
Code that relies on `resend_count` was added in 7ea4a03 and 247a1eb, but never worked.
This was fixed in #11607 which caused the problem to surface.
Hence undo the first commit entirely and change the logic of the second.
From November 2021, the Play Store will no longer be accepting
apps which use the deprecated getExternalStorageDirectory() API.
Therefore, this commit replaces uses of deprecated API with the new
scoped API (`getExternalFilesDir()` and `getExternalCacheDir()`).
It also provides a temporary migration to move user data from the
shared external directory to new storage.
Fixes#2097, #11417 and #11118
From November 2021, the Play Store will no longer be accepting
apps which use the deprecated getExternalStorageDirectory() API.
Therefore, this commit replaces uses of deprecated API with the new
scoped API (`getExternalFilesDir()` and `getExternalCacheDir()`).
It also provides a temporary migration to move user data from the
shared external directory to new storage.
Fixes#2097, #11417 and #11118
Code that relies on `resend_count` was added in 7ea4a03 and 247a1eb, but never worked.
This was fixed in #11607 which caused the problem to surface.
Hence undo the first commit entirely and change the logic of the second.
- iconv() prototype changed from traditional Unix defintion
to POSIX definition in 9.99.x.
- wchar_t is not a valid character set for iconv. Share code
with Android for using UTF-32.
This commit deprecates the forward, backward, left, and right binary
inputs currently used for player movement in the PlayerControl struct.
In their place, it adds the movement_speed and movement_direction
values, which represents the player movement is a polar coordinate
system.
movement_speed is a scalar from 0.0 to 1.0. movement_direction is
an angle from 0 to +-Pi:
FWD
0
_
LFT / \ RGT
-Pi/2 | | +Pi/2
\_/
+-Pi
BCK
Boolean movement bits will still be set for server telegrams and
Lua script invocations to provide full backward compatibility.
When generating these values from an analog input, a direction is
considered active when it is 22.5 degrees away from either
orthogonal axis.
Co-authored-by: Markus Koch <markus@notsyncing.net>
Co-authored-by: sfan5 <sfan5@live.de>
Some games provide users with enough freedom to create items
with metadata longer than 64KB, preventing this from causing
issues is on them but we'll still do the minimum not to abort
the server if this happens.
When setting a sprite animation, do not keep the last animation's frame number. Setting a new animation should start the animation at the start of the new animation.
This adds support for disable_settings to game.conf. In this you can specify a list of settings that should not be visible in the "local game" (or however it is called nowadays) tab. Enable Damage, Creative Mode and Host Server are supported.
Co-authored-by: Wuzzy <Wuzzy2@mail.ru>
Co-authored-by: Aaron Suen <warr1024@gmail.com>
Co-authored-by: rubenwardy <rw@rubenwardy.com>
* The problem were lines like these:
"# textdomain:"
* str_split does not add an empty last part if there is a delimiter
at the end, but this was probably assumed here.
* Add a simple PNG image encoder with Lua API
Add ColorSpec to RGBA converter
Make a safety wrapper for the encoder
Create devtest examples
Co-authored-by: hecktest <>
Co-authored-by: sfan5 <sfan5@live.de>
With the CMake changes to IrrlichtMt, it's now possible to use a target for IrrlichtMt.
Besides greatly improving the ease of setting up IrrlichtMt for users building the client, it removes the need for Minetest's CMake to include transitive dependencies such as image libraries, cleaning it up a tiny bit. The PR works by finding the IrrlichtMt package and linking to the target it provides. If the package isn't found and it isn't building the client, it will still fall back to using just the headers of old Irrlicht or IrrlichtMt.
Reduces stutter and freezes when playing.
* Maintains double SM and SM Color textures
* Light frustum update triggers incremental generation of shadow map into secondary 'future' textures.
* Every incremental update renders a portion of the shadow draw list (split equally).
* After defined number of frames (currently, 4), 'future' and 'current' textures are swapped, and DirectionalLight 'commits' the new frustum to use when rendering shadows on screen.
Co-authored-by: sfan5 <sfan5@live.de>
Apparently the C++ standard library is supposed to provide
specializations of std::hash for enums (even in C++11)
but those don't always work for whatever reason.
* Separate draw list and shadows update to reduce jitter
* Avoid draw list update and shadow update in the same frame
* Force-update shadows when camera offset changes
* Adjust minimum filter radius for perspective
* Expand shadow frustum when camera FOV changes, reuse FOV distance adjustment from numeric.cpp
* Read shadow_soft_radius setting as float
* Use adaptive filter radius to accomodate for PSM distortion
* Adjust filter radius for texture resolution
when minetest.remove_detached_inventory is called on script init, the environment is yet not set up,
hence m_env is still nullptr until all scripts are loaded
Add API for mods to hook liquid transformation events
Without this API, there is no reliable way for mods to be
notified when liquid transform modifies nodes and mods are
forced to poll for changes. This allows mods to detect
changes to flowing liquid nodes and liquid renewal using
event-driven logic.
* Add an .editorconfig to the repo root folder, providing code style hints for some text editors and making the code render properly in github.
Co-authored-by: hecktest <>
This completely removes any mention of the software and D3D drivers from MT, preventing the user from accidentally attempting to use them. Users who need a software renderer should be asked to install Mesa drivers which offer superior fidelity and performance over the 'burningsvideo' driver.
Fixes list clearing for inv:set_list() using same size, since 2db6b07.
addList() now clears the list in all cases. Use setSize() to resize without clearing.
Use user provided lib/irrlichtmt if available
Make it possible for a user to provide the IrrlichtMt dependency as
subdirectory at `lib/irrlichtmt`.
The subdirectory is added with the `EXCLUDE_FROM_ALL` flag to prevent
`libirrlichtmt.a` or other header files to be installed.
This enables the user to do the following to satisfy the IrrlichtMt
dependency:
git clone --depth 1 https://github.com/minetest/irrlicht.git lib/irrlichtmt
cmake . -DRUN_IN_PLACE=TRUE
Use posix mingw-w64 toolchain on Win64 builds where applicable, avoids
many build errors when using buildwin64.sh to build 64 bit builds on
Ubuntu based Linux distributions
Use ninja to build image, rename docker build steps: builder and runtime, add argument for docker image version
Signed-off-by: Bensuperpc <bensuperpc@gmail.com>
If enabled in minetest.conf, provides colored, clickable (middle-mouse or ctrl-left-mouse) weblinks in chat output, to open the OS' default web browser.
This permits to make evidence that we have some bad object passing on various code parts. I fixed majority of them to reduce the scope of passed objects
Unfortunately, for some edge cases i should have to expose ISceneManager from client, this should be fixed in the future when our POO will be cleaner client side (we have a mix of rendering and processing in majority of the client objects, it works but it's not clean)
* we don't need on CAO side more than SceneManager, and temporary. Pass only required SceneManager as a parameter to build CAO and add them to the current scene
* Use temporary the RenderingEngine singleton from ClientEnvironment, waitfor for better solution
* Make ClientActiveObject::addToScene virtual function mandatory to be defined by children to ensure we don't forget to properly define it
* No more access to the singleton instance from everywhere (RenderingEngine::get_instance dropped)
* RenderingEngine::get_timer_time is now non static
* RenderingEngine::draw_menu_scene is now non static
* RenderingEngine::draw_scene is now non static
* RenderingEngine::{initialize,finalize} are now non static
* RenderingEngine::run is now non static
* RenderingEngine::getWindowSize now have a static helper. It was mandatory to hide the global get_instance access
Make the RenderingEngine filesystem member non accessible from everywhere
This permits also to determine that some lua code has directly a logic to extract zip file. Move this logic inside client, it's not the lua stack role to perform a such complex operation
Found also another irrlicht <1.8 compat code to remove
It's often useful to know where the map block boundaries are for doing server admin work and the like.
Adds three modes: single mapblock, range of 5, and disabled.
* Do proper out-of-tree builds with buildbot
* Don't write to bin/ for cross builds
* This allows safely building multiple builds from the same source dir, e.g. with the buildbot.
* Disable Gettext (by default) and Freetype (entirely) for server builds
Writing vectors as strings is very common and should belong to `vector.*`. `minetest.pos_to_string` is also too long to write, implies that one should only use it for positions and leaves no spaces after the commas.
This fixes an out-of-bounds index access when the node resolver was already applied to the schematic (i.e. biome decoration).
Also improves the handling of the two cases: prior node resolving (m_nodenames), and after node resolving (manual lookup)
This PR is the second attempt to translate builtin.
Server-sent translation files can be added to `builtin/locale/`, whereas client-side translations depend on gettext.
The only valid usecase for these is interfacing with OS APIs
that want a locale/OS-specific multibyte encoding.
But they weren't used for that anywhere, instead UTF-8 is pretty
much assumed when it comes to that.
Since these are only a potential source of bugs and do not fulfil
their purpose at all, drop them entirely.
In compiler design especially, leaving behavior as "undefined" is a _strong_ condition that basically states that all possible integrity is violated; it's the kind of thing that happens when, say, dereferencing a pointer with unknown provenance, and most typically leads to a crash, but can result in all sorts of spectacular errors--thus, "it is undefined" how your program will melt down.
The pure-Lua implementation of `key_value_swap` does not permit UB _per se_ (assuming the implementation of Lua itself is sound), but does deterministically choose the value to which a key is mapped (the last in visitation order wins--since visitation order is arbitrary, _some_ value _will_ be chosen). Most importantly, the program won't do something wildly unexpected.
Remove old defaults system
Introduce priority-based fallback list
Use new functions for map_meta special functions
Change groups to use end tags
Unittest changes:
* Adapt unittest to the new code
* Compare Settings objects
This changes the installer to create its own Minetest folder instead of having the user create it themselves. This prevents spewing the contents of Minetest everywhere when users change the install directory and expect the installer to create a folder to put it in
The commit caused Shift-Clicking issues on Linux due to another Irrlicht bug where
KeyInput.Shift released keys do not trigger OnEvent()
MacOS users should build using a recent Irrlicht 1.8 development version.
See also: https://sourceforge.net/p/irrlicht/patches/321/
set_sky: New feature, keep note about the old syntax
get_us_time: Document overflow
localplayer: Document "nil" behaviour before initialization
collision_box: Safe limit of "1.45"
This only works when shaders are enabled.
The centroid varying avoids that the textures (which repeat themselves out of bounds) are sampled out of bounds in MSAA.
If MSAA (called FSAA in minetest) is disabled, the centroid keyword does nothing.
All terrain generation now occurs in one loop, instead of rivers being
carved afterwards in a separate loop.
Fixes the removal of nodes added by mods in 'register on generated'.
Avoids other problems and reduces the chance of future bugs.
Mapchunk generation time is reduced.
Also fixes a code mistake which resulted in river channel generation
being disabled at floatland altitudes even when floatlands were disabled.
The callback is only run when a change in HP is to be expected.
Following cases will not trigger the callback:
* Dead player damaged further
* Healing full-health player
* Change of 0 HP
According to the following table:
* MOUSE_L -> DIG
* MOUSE_R -> PLACE
* SCROLL_UP -> HOTBAR_NEXT
* SCROLL_DOWN -> HOTBAR_PREV
This commit entirely removes the special KeyTypes used for joysticks.
Support for the MOUSE KeyTypes had already been removed in the main
game code without adapting the joystick code, breaking joystick
input. This commit restores joystick functionality.
Formspec element to display models, written by @kilbith, rebased and tweaked.
Co-authored-by: Jean-Patrick Guerrero <jeanpatrick.guerrero@gmail.com>
Co-authored-by: sfan5 <sfan5@live.de>
A Minetest peer initiates a connection by sending a packet with an invalid peer_id, for whatever reason the code for doing this ran on both the client and the server meaning you could connect to a client if you knew what the address:port tuple it was listening on.
- Avoid calculating isBlockInSight for blocks without meshes.
- Add metric for how many blocks the client has currently loaded.
- Make some variables constant.
Add more detailed light detection functions, a function to get the artificial light (torches) and a function to get the sunlight as seen by the player (you can specify timeofday).
Co-authored-by: rubenwardy <rw@rubenwardy.com>
Run unused functions reported by cppcheck
This change removes a few (but not all) unused functions.
Some unused helper functions were not removed due to their complexity and potential of future use.
Features:
* Define Minimap available modes (surface/radar, scale) from Lua, using player:set_minimap_modes()
* New HUD elements for displaying minimap with custom size and placing
* New minimap mode for displaying a texture instead of the map
Fixes some other third person camera specific attachments.
Implements a single new flag for entities to be forced visible in first person mode.
Old mods do not need to be updated to use the new flag and are fully backwards compatible.
Allows catching a chatcommand call just after the command and the
parameters are parsed but before its existence is checked and before the
corresponding function is run. Returning `true` from a callback function
will prevent default handling of the command leaving mods to handle the
command manually.
This commit clarifies the maximal length of the serialized strings.
It will avoid accidental use of serializeString() when a larger string can be expected.
Removes unused Wide String serialization functions
This reverts 1a5b4b3 and further functions in serialize.cpp that are unused
The intend for a sane NetworkPacket/stream replacement was good, but a wrapper
class around i/ostream might be more versatile than introducing a new
vector-based serialization class.
Previously, the param2-controlled horizontal/vertical merge feature
(which was undocumented and forgotten) was always active, causing
uses of param2 other than "glasslikeliquidlevel" to affect H/V
merging.
Only respect H/V merge bits when paramtype2 = "glasslikeliquidlevel".
H/V merge bits and liquid level bits are designed to be used
simultaneously.
Moves the infotext depending on the value of the recent_chat_messages value + 2 additional lines to account for the 2 debug mode lines + 1 additional line as "buffer" for better readability if chat is full.
Erase all traces of normal "generation" from fragment shaders
Remove the "feature" from the engine and default config
Remove any leftover documentation of it
the event header seemingly being generic with libevent thus renaming it.
openal and opengl are deprecated on newer mac os releases thus suppressing the build warnings.
The inventory image size of the inventory image of nodes with drawtype allfaces (and related) is scaled as well if visual_scale is set (previously, the inventory image size was always the same)
"Predicts" whether something will be swapped for allow callbacks, then calls callbacks a second time with swapped properties.
Co-authored-by: SmallJoker <SmallJoker@users.noreply.github.com>
The default (PC-style) MainMenu works great on Android. Provides access to ContentDB and allows players to create many worlds in a few clicks.
Makes the interface consistent and eliminates player confusion.
Add override targets for all special_tiles entries in node definitions, allowing texture packs to replace these textures. This makes overrides work properly with a variety of drawtypes.
The targets are named special1 through special6, covering the the current length of the special_tiles array.
Falling nodes that were spawned prior the recent falling node changes did not require param2.
Default to param2 = 0 when none is found in the node data.
Blacklisted characters are replaced by '_' in the path. The display name is stored in world.mt, and duplicate file names are resolved by adding an incrementing suffix (_1, _2, _3, etc).
package.id is a sanitised combination of author and basename, used to
compare remote and local content. Minetest ignores `_game` when comparing
game names, so package.id has `_game` removed. This meant that the wrong
URL was being generated for View.
Recent changes to collision code have changed the behaviour of the 'touching_ground'
bool in movement code. This had the effect of disabling camera smoothing when
'air stepheight' occurred when jumping onto a node while pressing forwards against
the node, causing an unpleasant sharp camera movement.
Rewrite the conditions for camera smoothing such that it is applied when jumping.
* added vector.rotate
* added vector.forward_from_rotation and vector.up_from_rotation
* added vector.forward_up_to_rotatiton
* fixed some bugs and formatting with vector functions
* shortened name of some new vector functions and added documentation
* made vector.rotate not require a unit vector as axis
* fixed crash with vector.forward_up_to_rot
* renamed new vector functions, made vector.rotate apply a rotation matrix, old vector.rotate is now called vector.rotate_around_axis
* documented vector function changes
* removed some whitespace to appease luacheck
* implemented and fixed optimization of vector.rotate_around_axis by SmallJoker
* added some unit tests for rotation vector functions
* clarified that rotation vectors are in radians and according to the left hand rule
* hopefully appeased luacheck
* renamed rotation_to_horizontal to forward_at_rotation, rotation_to_vertical to up_at_rotation
* handled cases where sin or cos are 0 in rotation vector functions
* added more comments
* clarified documentation of rotation vector functions
* added more unit tests
* changed way in which vector.rotate_around_axis is adjusted for left handed coordinate systems
* made vector.rotate_around_axis actually left handed
* unrolled matrix multiplication
* removed vector.forward_at_rotation and vector.up_at_rotation
* prettified vector.rotate_around_axis, made previous commits not break anything
* removed references to removed vector.forward_at_rotation and vector.up_at_rotation
* removed documentation of removed vector functions
* clarified documentation and fixed styling of rotation vector functions
* restyled comments minorly
* spelling fixes and some hopefully better comments
* allowed 'up' to be missing from vector.directions_to_rotation and removed requirement for unit vectors as arguments
* made vector.rotate_around_axis() right handed again for consistency
* documented previous changes
* made matrix multiplication actually multiply
* renamed vector.directions_to_rotation() to vector.dir_to_rotation()
* optimized a distance comparison
* Fixed potential false positive in unit tests.
Co-authored-by: NetherEran <nethereran@hotmail.com>
Fixes two bugs:
* The camera offset was not applied to an object while detaching, briefly placing the irrlicht matrixnode in world space.
* When attaching, the matrixnode's absolute position was evaluated without evaluating the parent first, resulting in zeroed positions.
Incorrect parameter types are logged as errors, taking coercion into account.
This is a workaround to ensure mod compatibility.
Duplicate warnings are ignored per server instance.
Games often and increasingly do not use this mapgen alias, as it
is only required for Mapgen V6. Such games were triggering the
recently added error message.
Even if this mapgen alias was defined, dirt nodes placed under a
wide trunk were inconsistent with biomes that do not use dirt
surface nodes.
Place trunk nodes below a wide trunk instead of 'mapgen_dirt'.
On sloping ground, the trunk then extends down to the surface,
instead of the surface rising up to meet the trunk. This looks
more natural and does not alter the terrain.
Replace on_auth_fail callback with more versatile on_authplayer
Better clarify account login process in Lua API documentation
Change initial timestamp for newly registered accounts to -1
Fix incorrect value of 'mgv7_floatland_density'.
Use correct spelling of 'persistence'.
Move '3d_paralax_strength' into correct section (3D mode).
Refer to 'active_object_send_range_blocks' instead of non-existent 'active_object_range'.
automatic_rotate does not make sense if it is absolute. Make it relative.
To avoid bouncing, set_rotation did not update the client when automatic_rotate was set. That's no longer necessary because the new spinning method applies the rotation on top of the current one, and the updates are necessary for set_rotation to actually transform the object.
Co-authored-by: ANAND <ClobberXD@gmail.com>
Co-authored-by: Pedro Gimeno <pgimeno@users.noreply.notabug.org>
Floatland structure is vertically-compressed 3D noise.
Uses a lacunarity of 1.618 (the golden ratio) for high quality
noise.
Floatlands appear between user-settable Y limits, with smooth
tapering at each limit.
Simple user-settable density adjustment.
Shadow propagation is disabled in and just below floatlands, no
shadows are cast on the world surface.
Can be reconfigured to create a solid upper world layer between
the Y limits, lakes/seas can be optionally added to this.
This adds support for optional “off state” icons for statbars. “off state icons” can be used to denote the lack of something, like missing hearts or bubbles.
Add "off state" textures to the builtin statbars.
Co-authored-by: SmallJoker <mk939@ymail.com>
Previously the default tabheader height was different when using
real coordinates. This resulted in the height of tabs changing when
switching tabs in sfinv if some tabs used real coordinates.
* Server::overrideDayNightRatio doesn't require to return bool
There is no sense to sending null player, the caller should send a valid object
* Server::init: make private & cleanup
This function is always called before start() and loads some variables which can be loaded in constructor directly.
Make it private and call it directly in start
* Split Server inventory responsibility to a dedicated object
This splits permit to found various historical issues:
* duplicate lookups on player connection
* sending inventory to non related player when a player connects
* non friendly lookups on detached inventories ownership
This reduce the detached inventory complexity and also increased the
lookup performance in a quite interesting way for servers with thousands
of inventories.
Replace Log to Toast.
Start Native only after successful unpacking.
Light refactoring in CopyZipTask.
Update NDK version.
Co-authored-by: ubulem <berkut87@gmail.com>
PLAYER_MAX_BREATH_DEFAULT was earlier set to 11, so that 10 bubbles are shown before the breath bar disappears.
Now, PLAYER_MAX_BREATH_DEFAULT is set to 10, and the breath_bar scaling code in builtin has been tweaked to show all 10 bubbles before hiding the breath_bar
* minetest.serialize: Reversible number to string conversion
The %a format is not supported in Lua 5.1.
This commit also adds two tests for number serialization.
* Fix configuration caching in log_deprecated
The configured variable was never set to true.
I've set the variables to thread_local because the configuration should be reloaded after reentering the world from mainmenu.
Removes duplicated offset calculations from Game and use whatever the Camera class returns.
This keeps the eye position nicely in sync, and gets rid of duplicated code.
* Optimize getObjectsInsideRadius calls
our previous implementation calls the ActiveObjectMgr to return ids and then lookup those ids in the same map and test each object
Instead now we call the global map to return the pointers directly and we ask filtering when building the list using lamba.
This drop double looping over ranges of active objects (and then filtered one) and drop x lookups on the map regarding the first call results
New formspec elements:
- `scroll_container[<X>,<Y>;<W>,<H>;<scrollbar name>;<orientation>;<scroll factor>]`
- `scroll_container_end[]`
Other elements can be embedded in this element. Scrollbar must be placed manually.
* Dockerfile: use alpine to reduce size
* Fix the UID & GID + alpine version + rights
* Reduce the junk when we copy, only copy needed files
* Build in the right cmake place & permit customize mtg version
* Latest build fixes
Co-authored-by: Loïc Blot <nerzhul@users.noreply.github.com>
ServerEnvironment is a huge class with many accessors. In various places it's not needed
Remove it to reduce the ServerEnvironment view.
Idea here is to reduce size of some of our objects to transport lightweight managers and permit easier testing
Pathfinder is now tied to a generic map, not a ServerMap, it can be
ported to client
Move LuaEntitySAO to a new dedicated file
Drop TestSAO (useless object)
Drop the old static startup initialized SAO factory, which was pretty useless.
This factory was using a std::map for 2 elements, now just use a simple condition owned by ServerEnvironment, which will be lightweight, that will also drop a one time useful test on each LuaEntitySAO creation. This should reduce server load on massive SAO creation
* Drop genericobject.{cpp,h}
This file is not for generic object but for ActiveObject message passing.
Put ownership of the various commands to the right objects and cleanup the related code.
* Protect ServerActiveObject::m_messages_out
* typo fix
* Automated build changes
* drop a useless ubuntu non lts version
* update gitlab ci syntax to modern one
* add debian 10 step on the gitlab ci pipeline
* switch docker build to Debian 10
* add .gradle folder to gitignore
- Move the text segment below the 47-bit limit, needed for script_exception_wrapper which must be lightuserdata
- Replace CUSTOM_RIDX_SCRIPTAPI with full userdata
This will likely be more intuitive for users and should play better
with sandboxed distributions such as Flatpak.
In addition, the screenshot directory will now be created if it doesn't
exist already.
The game.conf has a disallowed_mapgens option. However, some games
require a certain mapgen to be used, like the CTF plugin. This change
adds an option to specify allowed mapgens so that the setting can be
specified in a way that needn't be updated as map generators are added
to Minetest.
This reverts commit df74d369a3.
This reverts commit 908e762479.
Restores the original collision detection bugs to release 5.2.0 prior the large collision detection fix.
Previously textures of the side faces on flowing liquid nodes would
become distorted on different axis depending on the liquid level. This
is because the nodes always had the same texture coordinates, even when
the generated face could have different sizes. This solves that problem
by adjusting the texture coordinates for the vertices making up the top
of the faces, so the textures will not look compressed for smaller
faces.
This adds a vector that holds pointers to elements that should only be visible while being drawn.
In the guifsmenu's draw func, all elements in this vector are made visible and invisible again. Apart from there, they are always invisible. (Well they are still visible before the first drawn, does this matter? If yes, it could be fixed easily with some lines of code everywhere.)
Camera's near-plane will be hard-coded to 0.1 on all non-Android platforms. The upper-bound of this setting has been reduced to 0.25, as 0.5 is just way too high.
* Fix pathfinder fail when startpos is over air
* Note down pathfinder restrictions
* Implement real A* search
* Pathfinder: Implement buildPath non-recursively
* Update find_path documentation
* Pathfinder: Check if jump path is unobstructed
* Pathfinder: Fix drop check first checking upwards
* Pathfinder: Return nil if source or dest are solid
* Pathfinder: Use priority queue for open list
This bug is only exposed by 91eef646a5
independent of the move of get_connected_players from Lua to C++.
Previously, there would be a small time window where the SAO had
its peer ID set to PEER_ID_INEXISTENT but the RemotePlayer was
still linked to the SAO, resulting in an ObjectRef that crashed
on certain function calls (#9387).
The game minetest.conf flags directly overwrote the global minetest.conf default values, resulting in unwanted erased mapgen flags.
* Fix set_mapgen_setting
Unified flags handling in C++ and Lua Settings API
-> Reading only, for now. Writing can be implemented later, if needed.
API function to read the currently active flags
-> was impossible from Lua
Co-authored-by: Wuzzy <wuzzy2@mail.ru>
This is necessary under Windows systems, and direct IPv6 connections.
Windows universally disallows ':' from occuring in filenames.
Other disallowed characters on Windows:
\ / * ? " < > |
are not relevant to hostnames, IPv4 or IPv6 addresses.
Anyone who has got an existing server map saved on Linux with ':' in
the world save will want to keep that save.
The upstream JsonCpp project has renamed the `json/features.h` file to
`json/json_features.h`. This patch fixes the JsonCpp installation search
by looking for `json/allocator.h` which has not been renamed on newer
versions of JsonCpp.
Fixes: https://github.com/minetest/minetest/issues/9119
GenericCAO::getPosition() did not take the camera offset into account
LocalPlayer attachment cleanup: Use sane getParent() function
Make that getPosition() (GenericCAO and LocalPlayer) always return the absolute position
This patch replaces the statement in the README about a build dependency of the
minetest binary on the package “build-essential” with a corresponding statement
about build dependencies on the three packages “g++”, “make”, and “libc6-dev”.
Though often used as a shorthand, “build-essential” is not a package used to
install packages that are essential for building software – “build-essential”
depends on packages that are essential for building Debian packages. Therefore,
the dependency on “build-essential” implies a dependency on a lot of packages that
are not actually necessary to build minetest (e.g. the Perl programming language).
* Formspec: Fix priorities for version < 3
1) Introduce 'priority' to 'FieldSpec'
2) Sort elements based on 'priority'
3) Assign 'name' to the Item Image Button's image to show tooltips again
Low-disruption first step towards removing the hardcoded cave liquid
code. Since MT 5.0.0 cave liquids can be defined and located by
biome definitions instead.
In games that do not yet use biome definitions to define and locate
cave liquids (MTGame does), lava will now appear below
y = water_level - 256 instead of below 'lava depth' (usually y = -256).
Therefore no change in most mapgens if using the default 'lava depth'.
The upstream JsonCpp project has renamed the `json/features.h` file to
`json/json_features.h`. This patch fixes the JsonCpp installation search
by looking for `json/allocator.h` which has not been renamed on newer
versions of JsonCpp.
Fixes: https://github.com/minetest/minetest/issues/9119
Previously, the only way to disable the 3D noise tunnels was to set
'cave width' > 1.0, however doing so did not disable the very intensive
noise calculations or the generation loop.
All the other types of cave generation (randomwalk caves, caverns)
can already be independently and completely disabled.
This feature is now needed more because the small randomwalk caves are
now available for use as an alternative to the 3D noise tunnels.
Add mapgen parameters to set the range of the random number of
randomwalk caves per mapchunk, and to set the proportion that are
flooded with liquids.
Default values are, for now, unchanged from the previous hardcoded
values.
Add parameters to allow small randomwalk caves
Disabled by default for now as they have never been present in the
non-mgv6 mapgens.
Revert gamma upper limit to 3.0 because that was raised based on
a misunderstanding and had no benefit. A sane upper limit is
needed as players on a competitive server tend to use the maximum.
Set gamma lower limit to 0.33 for consistency with 3.0.
Set sane limits on alpha, beta, boost and enforce these in code
to limit values entered in minetest.conf and to avoid easy cheating
by editing settingtypes.txt.
Improve documentation and 'readable' setting names.
Clarify that gamma does not significantly affect natural night light.
light.cpp: Various codestyle and comment improvements.
All on_* hooks that return an itemstack are NOT guaranteed to
modify and return the original stack. We cannot count on the
behavior of the existing builtin definitions not to be overridden
by game/mod logic.
This value reduces how far randomwalk caves can extend into the
mapchunk padding, to avoid 'out of voxelmanip' cave nodes which cause
flattened cave walls.
Testing shows that a value of 2 (instead of 10) is enough to make
'out of area' nodes extremely rare.
Reducing this value results in a higher chance of overlap and
connection with caves of neighbour mapchunks.
- Add style properties for overriding the the hovered/pressed state
- By default, hovered buttons are a lighter version of the base color
- By default, pressed buttons are a darker version of the base color
- Add hovered bg image support for image buttons (style property)
Does not clear the parent's attachment information when the child is deleted locally.
Either it was removed permanently, or just temporary - we don't know, but it's up to the server to send a *detach from child" packet for the parent.
Previously, the 'rivers' checkbox was missing for mgcarpathian, caused by the 'possible flags' order: 'caverns,nocaverns,rivers,norivers'.
Also reorder mgcarpathian 'possible flags', but only for consistency.
1. Pass current camera offset to shader, so shader have access to the global coordinates
2. Pass animation timer to fragment shader. C++ code is already there, just wasn't declared in the shader
3. Delay animation timer wrap-around (from 100s to about 16 minutes)
The setting now accepts values between 1 and 8 in the
Advanced Settings menu.
Values 0 and 1 now behave the same way (setting it to 1 won't
disable MSAA anymore), so there's no need to expose 0 as a value.
This closes#8939.
While preserving the general character of dungeon structure.
Slightly increase the range of standard room horizontal size, while
preserving the average horizontal size.
Return to classic maximum large room size of 16x16x16.
Make 1 in 4 dungeons have a 1 in 8 chance for each room being 'large',
making multiple large rooms possible for the first time.
Make 1 in 8 dungeons allow diagonal corridors, to make these a little
more common.
Make corridor width vary from 1 to 2, but forced to 2 if diagonal
corridors are allowed, to make them passable.
Add some comments.
Safety-guards for CSM callbacks to abort on a bad implementation
Only run callbacks when the mods are loaded (and with it: builtin)
Duplication checks inside constructors
Remove unusable 'minetest.setting_*' from client_lua_api.txt
lua_api.txt:
- Define the 'mod.conf' format
- More precise 'settingtypes.txt' format reference
- Document special sound files 'player_*damage'
- Group, sort and add 'not_in_creative_inventory' special group
- Define the 'Settings' format
- Warning about incorrect byte saving in 'StorageRef'
- Note about non-persistent player definitions fields
- Better 'leveldiff' and 'level' group description
Before opening the file for writing, its file size is tested. If it exceeds 50 MB, it is moved to debut.txt.1, otherwise the log is appended to the old messages. An old debut.txt.1 is removed if it already exists.
Improve 'readable' setting names for waving water settings.
Change 'near plane' to 'near clipping plane'.
Document physics settings.
mgv6_spflags:
Change 'new biome system' to 'snowbiomes flag' for clarity.
Add missing 'noflat' flag to default flags.
Calculate 'i' inside 'y' loop to avoid 'i' and 'y' becoming
out of step due to the uses of 'continue'.
Simplify calculation of 'p2d' when coordinates are inverted.
Remove some unnecessary and unreliable 'index out of
voxelmanip' checks.
Move calculation of '&em' out of loops.
For 'Loop further down until not air' code, use y coordinate
to detect being out of voxelmanip, instead of checking index
which did not detect that.
Add and improve comments.
Indent the 'for (;; y--) {' loop.
Improve format and fix codestyle issues.
This change reduces the amount of sent data towards clients. Inventory lists that are already known to the player are skipped, saving quite some data over time.
Raises protocol version to 38 to ensure correct backwards-compatible code.
'player.png' and 'player_back.png' are hardcoded into the engine as
the default appearence of the player object, so the textures should
be present in the engine.
This results in a functional fallback sprite player for when a game
has no player appearence related code.
In MapgenV6::flowMud(), the previous implementation of coordinate
inversion caused the 2 inverted mudflow iterations (out of the 3
iterations) to not loop over the area, so only 1 non-inverted
iteration occurred.
Fix this bug but only iterate mudflow twice, as mapgen v6 has only
had 1 iteration for many years. There is now a good balance of 1
non-inverted iteration and 1 inverted iteration.
* Fix unnecessary exception use in Server::SendBlocks
The code in this method calls getBlockNoCreate and then
messes around with try...catch to skip blocks which are not
in the memory. Additionally, it repeatedly calls
m_env.getMap() inside this loop. Speed the code up by
extracting the m_env.getMap() out of the loop and getting
rid of the try...catch.
* Fix unnecessary exception use in Server::SendBlock
Another unnecessary try...catch is slowing down
Server::SendBlock. Remove that to speed it up and get a nice
side effect of simplifying the code in question.
* Fix unnecessary exception use in MMVManip::initialEmerge
Remove another unneeded exception usage from
MMVManip::initialEmerge to speed that code up and simplify
it but be careful to not remove the braces as there is a
TimeTaker in use there.
The Map::getSectorNoGenerate throws an exception but no other
code is really dependent on that. Fix the odd instance of
misuse in ClientMap::emergeSector and remove the exception
throwing version of the method along with the "NoEx" suffixes
in the names of these methods.
Update the profiler names to make more sense of what they actually represent
Move the profiler code from header to its source file
Use monospace font to align lines
Format the statistics line to align better with surrounding values
Refresh the profiler each 3 seconds (roughly)
The isNodeUnderground calls getBlockNoCreate which calls
getBlockNoCreateNoEx and throws InvalidPositionException
if the returned value is nullptr, which isNodeUnderground
then catches to return "false". Remove the try..catch in
isNodeUnderground by calling getBlockNoCreateNoEx instead
of getBlockNoCreate and checking the returned value for
nullptr.
Pointers shall be set to nullptr, not 0, according to the
coding standards. By implication they shall be compared with
nullptr, not 0, too. Fix this code to match that.
This fixes overridden items keeping their old groups in the group to
items mapping even after their groups have been changed in lua.
It also prevents a more widespread issue where overriding an item
will add its content ID *twice* to the mapping, resulting in odd
behaviour in features such as ABMs.
This fix consists of two parts:
- Clear the list of stored entities. This has no side-effects.
- Catch the case where active entities exist and print a message.
Clearing the active entitiy list has side-effects that should
be handled. (those entities are known to the environment and
to clients).
As avoiding those side-effects is more complex, and as this
problem is not expected to occur (with PR #4847 merged), there
is no real incentive to implement this ATM.
This issue was a contributing factor to bug #4217. With the other
contributing factor removed (PR #4847), this commit makes sure this
factor does not go unnoticed if it ever happens again.
The commit 526a9e4b66 breaks
the non-GLES2 setups because the code that is intended to
handle that is behind "elseif()" which is interpreted as
"elseif(false)" and thus the code never gets executed. Fix
that by changing the offending line to else().
Additionally, to avoid breaking the server only build
(which shall not have a dependency on GL/GLU/GLES at all),
enclose the entire block code in if(BUILD_CLIENT).
* Fix some issues with minetest.clear_craft
- Fix memory leak
- Fix crafts with an output count not being cleared when clearing by
input.
- Fix recipe list being reversed when clearing by input.
* Add CraftInput::empty()
Avoid an unsuitable spawn position (which if outside mapgen limits can
cause a crash) if the main 0-3999 loop reaches its end. Fallback to a
spawn at 0,0,0.
Check the mapgen-returned 'spawn_level' value for being outside limits.
When 'air_count' reaches 2, move back down 1 to spawn in the lower
empty node.
If the spawn position is disallowed by 'objectpos_over_limit()', 'break'
from loop instead of 'continue' because positions above are probably
also over limit.
Reset 'air_count' to 0 if an obstruction is found, to make 'air_count'
consecutive empty nodes.
Allow spawn in 'airlike' drawtype nodes such as mod-added vacuum,
alien atmospheres, fog etc.
Add clarifying comments and improve codestyle.
This fixes an issue where when the engine looked up groups (for example,
in ABM node names), NodeDefManager's m_group_to_items would contain nodes
with a group value of zero, resulting in nodes with flammable = 0 being
burned by a fire mod with a group:flammable checking ABM.
It brings consistency to the behaviour described in the api
documentation, where zero and nil groups should be the same.
Previously, this wrongly returned ground level (a position containing
a solid node) as spawn level.
Return ground level + 2 (+ 2 to spawn above biome 'dust' nodes).
Improve codestyle and make more consistent with generateTerrain().
Due to commit ec3142a , UnitSAO's getArmorGroups() did not match
ServerActiveObject's, notably resulting in the lua get_armor_groups() call
returning nothing.
Document new meaning of immortal=1 for players
Disable breathing if player is immortal
Hide builtin statbars if player immortal (delayed)
Co-authored-by: ClobberXD <ClobberXD@gmail.com>
This prevents set_properties() calls that have nothing to do with hp_max or breath_max overriding the saved hp before another mod has the chance to set a player's intended hp_max (such as in on_joinplayer).
What happened:
1) Object data is received. Client begins to read the data
2) Client initializes all its children (gob_cmd_update_infant)
3) Children try to attach to parent (yet not added)
4) Parent initializes, is added to the environment
And somewhere in between, Irrlicht wrecks up the attachments due to the missing matrix node.
The solution here is to:
1) Use the same structure as ServerActiveObject
2) Attach all children after the parent is really initialized
v6 always last to discourage selection.
Special mapgens flat, fractal, singlenode, next to last. Of these, singlenode
last to discourage selection.
Of the remaining, v5 last due to age, v7 first due to being the default.
Re-add the random size range for large rooms.
Remove 'first_room_large' bool.
Add 'large_room_chance' parameter that can disable large rooms,
specify 1 large room, or specify a chance for large rooms.
If 1 or a chance is specified, the first generated room is large,
to take advantage of the intersection checks that are done for the
1st room only.
Move 'num_dungeons' to 'DungeonParams'.
Add new parameter 'num_rooms' to replace 'rooms_min' and 'rooms_max',
so that the mapgen has complete control over the number of rooms.
Add new bool 'first_room_large' so that the mapgen chooses this
instead of a hardcoded 1 in 4 chance.
Add new parameter 'room_size_large' to replace 'room_size_large_min'
and 'room_size_large_max', so that the mapgen has complete control
over this.
This was previously documented under the general ObjectRef section with a note that this won't work on players. So I think this would fit better with Lua entity-only methods.
This PR also changes the title of the Lua entity-only section from `LuaEntitySAO-only` to `Lua entity only`.
This also clarifies the fact that Minetest saves `minetest.conf`
when closing Minetest for the first time, rather than when starting it
for the first time.
This also fixes the default key for the pitch move mode which is now P.
Biome-defined dungeon nodes was added as a feature to MT 5.0.0.
So now remove most of the hardcoded dungeon node code that assumes a
game has stone, sandstone, desert stone, and no other stone types.
If biome-defined dungeon nodes are not found, dungeon nodes fall back
to the 'cobble' mapgen alias if present, if not present they fall back
to biome-defined 'stone'.
Remove now-unnecessary mapgen aliases from MapgenBasic. Non-mgv6 games
now only need to define 3 to 5 mapgen aliases.
Document dungeon parameters.
Make c_lava_source fallback to c_water_source as both are used as cave
liquids.
PR created under the employment of EvidenceBKidscode
* Variables to set git repositories urls (allows to build from another repo)
* Variables to set git branch to build from (allows to build from non-master branch)
* Variables to change built name
* Make -j uses the proper number of processors (autodetect)
* Changed toolchain from win32 to adpat it to non-debian distros
They verify the provided value and error if a wrong value got provided
command line description for color was differnt on win32 but code did not handle any differenc
extended the command line description for world and worldname that it is clear that they only start a local game if used with --go
Fixes#7875
Rivers are disabled by default and will not be added to existing worlds.
Rewrite getSpawnLevelAtPoint() to be simpler and more consistent with
generateTerrain().
saves the forceloaded blocks periodically.
checks every 10 seconds if the forceloaded blocks got changed in-game
and persists them on-disk if that's the case
Add user-settable noise parameters for dungeon density to each mapgen,
except V6 which hardcodes this noise parameter.
Move the calculation of number of dungeons generated in a mapchunk out
of dungeongen.cpp and into mapgen code, to allow mapgens to generate
any desired number of dungeons in a mapchunk, instead of being forced
to have number of dungeons determined by a density noise.
This is more flexible and allows mapgens to use dungeon generation to
create custom structures, such as occasional mega-dungeons.
The old texture modifier is restored by passing `m_previous_texture_modifier`.
Either copy it manually or let the function parameter do that.
Victims so far:
8e0b80a Apr 2018
eb2bda7 May 2019
When multiple recipes are applicable, the recipes are prioritised in this order:
toolrepair < shapeless with groups < shapeless < shaped with groups < shaped
For cooking and fuel, items are prioritised over item groups
This allows games to specify biome cave liquids and avoid the old
hardcoded behaviour, but preserves the ability to have multiple
cave liquids in one biome, such as lava and water.
When multiple cave liquids are defined by the biome definition,
make each entire cave use a randomly chosen liquid, instead of
every small cave segment using a randomly chosen liquid.
Plus an optimisation:
Don't place nodes if cave liquid is defined as 'air'
* Optimize statbar drawing
The texture name of the statbar is a string passed by value.
That slows down the client and creates litter in the heap
as the content of the string is allocated there. Convert the
offending parameter to a const reference to avoid the
performance hit.
* Optimize texture cache
There is an unnecessary temporary created when the texture
path is being generated. This slows down the cache each time
a new texture is encountered and it needs to be loaded into
the cache. Additionally, the heap litter created by this
unnecessary temporary is particularly troublesome here as
the following code then piles another string (the resulting
full path of the texture) on top of it, followed by the
texture itself, which both are quite long term objects as
they are subsequently inserted into the cache where they can
remain for quite a while (especially if the texture turns
out to be a common one like dirt, grass or stone).
Use std::string.append to get rid of the temporary which
solves both issues (speed and heap fragmentation).
* Optimize animations in client
Each time an animated node is updated, an unnecessary copy of
the texture name is created, littering the heap with lots of
fragments. This can be specifically troublesome when looking
at oceans or large lava lakes as both of these nodes are
usually animated (the lava animation is pretty visible).
Convert the parameter of GenericCAO::updateTextures to a
const reference to get rid of the unnecessary copy.
There is a comment stating "std::string copy is mandatory as
mod can be a class member and there is a swap on those class
members ... do NOT pass by reference", reinforcing the
belief that the unnecessary copy is in fact necessary.
However one of the first things the code of the method does
is to assign the parameter to its class member, creating
another copy. By rearranging the code a little bit this
"another copy" can then be used by the subsequent code,
getting rid of the need to pass the parameter by value and
thus saving that copying effort.
* Optimize chat console history handling
The GUIChatConsole::replaceAndAddToHistory was getting the
line to work on by value which turns out to be unnecessary.
Get rid of that unnecessary copy by converting the parameter
to a const reference.
* Optimize gui texture setting
The code used to set the texture for GUI components was
getting the name of the texture by value, creating
unnecessary performance bottleneck for mods/games with
heavily textured GUIs. Get rid of the bottleneck by passing
the texture name as a const reference.
* Optimize sound playing code in GUIEngine
The GUIEngine's code receives the specification of the sound
to be played by value, which turns out to be most likely a
mistake as the underlying sound manager interface receives
the same thing by reference. Convert the offending parameter
to a const reference to get rid of the rather bulky copying
effort and the associated performance hit.
* Silence CLANG TIDY warnings for unit tests
Change "std::string" to "const std::string &" to avoid an
unnecessary local value copy, silencing the CLANG TIDY
process.
* Optimize formspec handling
The "formspec prepend" parameter was passed to the formspec
handling code by value, creating unnecessary copy of
std::string and slowing down the game if mods add things like
textured backgrounds for the player inventory and/or other
forms. Get rid of that performance bottleneck by converting
the parameter to a const reference.
* Optimize hotbar image handling
The code that sets the background images for the hotbar is
getting the name of the image by value, creating an
unnecessary std::string copying effort. Fix that by
converting the relevant parameters to const references.
* Optimize inventory deserialization
The inventory manager deserialization code gets the
serialized version of the inventory by value, slowing the
server and the client down when there are inventory updates.
This can get particularly troublesome with pipeworks which
adds nodes that can mess around with inventories
automatically or with mods that have mobs with inventories
that actively use them.
* Optimize texture scaling cache
There is an io::path parameter passed by value in the
procedure used to add images converted from textures,
leading to slowdown when the image is not yet created and
the conversion is thus needed. The performance hit is
quite significant as io::path is similar to std::string
so convert the parameter to a const reference to get rid of
it.
* Optimize translation file loader
Use "std::string::append" when calculating the final index
for the translation table to avoid unnecessary temporary
strings. This speeds the translation file loader up
significantly as std::string uses heap allocation which
tends to be rather slow. Additionally, the heap is no
longer being littered by these unnecessary string
temporaries, increasing performance of code that gets
executed after the translation file loader finishes.
* Optimize server map saving
When the directory structure for the world data is created
during server map saving, an unnecessary value passing of
the directory name slows things down. Remove that overhead
by converting the offending parameter to a const reference.
* Force send a mapblock to a player.
Send a single mapblock to a specific remote player.
This is badly needed for mods and games where players are teleported
into terrain which may be not generated, loaded, or modified
significantly since the last player visit.
In all these cases, the player currently ends up in void, air, or
inside blocks which not only looks bad, but has the effect that the
player might end up falling and then the server needs to correct for
the player position again later, which is a hack.
The best solution is to send at least the single mapblock that the
player will be teleported to. I've tested this with ITB which does this
all the time, and I can see it functioning as expected (it even shows
a half loaded entry hallway, as the further blocks aren't loaded yet).
The parameter is a blockpos (table of x, y, z), not a regular pos.
The function may return false if the call failed. This is most likely
due to the target position not being generated or emerged yet, or
another internal failure, such as the player not being initialized.
* Always send mapblock on teleport or respawn.
This avoids the need for mods to send a mapblock on teleport or
respawn, since any call to `player:set_pos()` will pass this code.
* Improve readability of debug menu by using '|'
* Restore whitespace to separate yaw and cardinal direction
Co-Authored-By: ClobberXD <ClobberXD@gmail.com>
* Optimize packet construction functions
Some of the functions that construct packets in
connection.cpp are using a const reference to get the raw
packet data to package and others use a value passed
parameter to do that. The ones that use the value passed
parameter suffer from performance hit as the rather bulky
packet data gets a temporary copy when the parameter is
passed before it lands at its final destination inside the
newly constructed packet. The unnecessary temporary copy
hurts quite badly as the underlying class (SharedBuffer)
actually allocates the space for the data in the heap.
Fix the performance hit by converting all of these value
passed parameters to const references. I believe that this
is what the author of the relevant code actually intended
to do as there is a couple of packet construction helper
functions that already use a const reference to get the
raw data.
* Optimize packet sender thread class
Most of the data sending methods of the packet sender thread
class use a value passed parameter for the packet data to be
sent. This causes the rather bulky data to be allocated on
the heap and copied, slowing the packet sending down. Convert
these parameters to const references to avoid the performance
hit.
* Optimize packet receiver thread class
The packet receiver and processor thread class has many
methods (mostly packet handlers) that receive the packed data
by value. This causes a performance hit that is actually
worse than the one caused by the packet sender methods
because the packet is first handed to the processPacket
method which looks at the packet type stored in the header
and then delegates the actual handling to one of the
handlers. Both, processPacket and all the handlers get the
packet data by value, leading to at least two unnecessary
copies of the data (with malloc and all the slow bells and
whistles of bulky classes).
As there already is a few methods that use a const reference
parameter for the packet data, convert all this value passed
packets to const references.
6125 is the time of first full light according to 'get_node_light()',
and the time of first full light visually when basic shaders are on.
This is the optimum default new world start time, taking all possible
games into account.
The previous time assumed a game similar to Minetest Game. Games
should set this setting themselves according to their needs.
It turns out there is no need to return the new value and
preserve the old one in random_turn, the procedure can be
made to modify the value in-place. This saves quite a bunch
of parameter and return value copying.
Previously, when basic shaders were enabled, the function
time_to_daynight_ratio() returned values jumping between 149 and 150
between times 4375 and 4625, and values jumping between 999 and 1000
between times 6125 and 6375, (and the corresponding times at sunset)
due to tiny float errors in the interpolation code.
This caused the light level returned by blend_light() to jump between
14 and 15, which became noticeable recently as those light levels were
given different visual brightnesses.
Add early returns to avoid the problematic interpolation, and to
avoid unnecessary running of the loop.
Makes the liquid waving shader per-nodedef like waving leaves/plants,
instead of being applied to all liquids.
Like the waving leaves/plants shaders, the liquid waving shader can
also be applied to meshes and nodeboxes.
Derived from a PR by t0ny2.
Like randomwalk caves, preserve nodes that have 'is_ground_content = false',
to avoid dungeons that generate out beyond the edge of a mapchunk destroying
nodes added by mods in 'register_on_generated()'.
Issue discovered by, and original PR by, argyle77.
This change permits to use up-to-date compilers, clang-tidy and
clang-format
It also refactor the tidy/format step to drop the binary selection from
scripts and perform it directly in travis
Shorter, simpler, clearer and more consistent with other mapgens,
while preserving functionality.
Base terrain shape is unchanged.
With the 'vary river depth' option disabled, river surface level
is unchanged.
Behaviour of the 4 heat/humidity/river depth options is very
slightly changed due to bugfixes and code cleanup (the mapgen is
'unstable').
Apply heat and humidity gradients above water_level instead of
above y = 0.
The getS16NoEx() handler will return true unless there is a
`[num_emerge_threads]` line in the `minetest.conf` at which
point the excption handler part is reached. Due to the fact that
`defaultsettings.cpp` has a default value set for this setting,
that never will happen.
Because of this, the code will never check the number of threads on
the system, and keep `nthreads = 0`. If that happens, the value is
changed to `1` and only 1 emerge thread will be used.
The default should be set to `1` instead, due to the potential unsafe
consequences for the standard sqlite map files, but that should be a
separate commit that also adds documentation for that setting. This
commit focuses on removing this `hiding` bug instead.
I removed the MapNode constructor which takes a nodename and gives the node's id or CONTENT_IGNORE
The code which used this constructor (two places) now handles the situation of not registered nodes correctly:
* minetest.set_node and similar functions make minetest crash when a not registered node is passed
* reverting a node with rollback aborts if the node is not registered
* Do not always show every depends textfieds
When there are no dependencies, it does not longer show an empty list.
* Adjust the list height to avoid a scrollbar when possible
* change minimum height and no dependencies message
* Do not get depends for modpacks
Use "append" method to construct the various game paths
instead of wasteful string concatenation. Additionally, use a
temporary to extract and reuse a result of a few common
subexpressions to further reduce the overhead.
The "what" parameter is being passed by value, most likely by
accident as the type is "const std::string". Convert it to a
reference by adding the missing "&".
* Add sounds for falling and attached nodes
The sound specified in `node_definition.sounds.fall` is used.
When a falling node is spawned at a position or an attached node drops, the sound is played at this position.
* allow all sorts of soundspecs
* Fix color command line parameter ignorance
* coloured log: Support detecting the tty on windows
* Print an error message when setting something invalid as color mode instead of silently using mode never
* Revert "coloured log: Support detecting the tty on windows"
This reverts commit 4c9fc6366487ac0e6799e181796ca594797bb6f8.
It didn't work for travis and belongs to a separate PR
* Allow adjusting the log color with an environment variable
If --color is not passed to minetest, is used to decide on the log colorization.
Minetest settings can not be used instead of an environment variable because logs may appear before loading them.
* fix empty if body
This loop makes multiple passes over m_stack (type std::list) in order to remove all elements with a specified value. Replacing the loop with a call to std::list::remove does the same job, but in only one pass.
This sends the following header to a remote media server:
Referer: minetest://<server_name>:port
This was verified with CTF and the Minetest Public Remove Media
server. If the servername was a plain IPv6 address it will
contain `:` characters and will be encapsulated in `[]` to
be a valid URI.
The getS16NoEx() handler will return true unless there is a
`[num_emerge_threads]` line in the `minetest.conf` at which
point the excption handler part is reached. Due to the fact that
`defaultsettings.cpp` has a default value set for this setting,
that never will happen.
Because of this, the code will never check the number of threads on
the system, and keep `nthreads = 0`. If that happens, the value is
changed to `1` and only 1 emerge thread will be used.
The default should be set to `1` instead, due to the potential unsafe
consequences for the standard sqlite map files, but that should be a
separate commit that also adds documentation for that setting. This
commit focuses on removing this `hiding` bug instead.
* Drop the ID mapper, use a big u64 instead. This will permit to resync server ids properly with the manager code
* Modernize some code parts (std::unordered_map, auto)
* generate id on client part on U32_MAX + 1 ids, lower are for server ids
- minetest.get_hit_params
- minetest.get_dig_params
- table.indexof
- Scope of minetest.register_alias
- Vector function parameters
- More explanation of when `minetest.on_player_receive_fields` is called
- Syntax/semantics of the fields in `minetest.on_player_receive_fields`
Centralize HUD updating in update_builtin_statbars.
Fixes race condition in 'on joinplayer' that causes stat bar bugs.
Correctly scales stat bars to custom max values set by mods.
Store the rotation in the node as a 4x4 transformation matrix internally (through IDummyTransformationSceneNode), which allows more manipulations without losing precision or having gimbal lock issues.
Network rotation is still transmitted as Eulers, though, not as matrix. But it will stay this way in 5.0.
Previously, when using 'place on vmanip' to add a schematic to a
lua voxelmanip, if part of the schematic was outside the voxelmanip
volume, the outside part would often appear in a strange place
elsewhere inside the voxelmanip instead of being trimmed off.
This was due to the out-of-bounds check checking the index.
A position outside the voxelmanip can have an index that satisfies
'0 <= index <= voxelmanip volume', causing the node to be placed
at a strange position inside the voxelmanip.
Use 'vm->m_area.contains(pos)' instead.
Move index calculation to later in the code to optimise.
If a formspec is submitted from a form fields handling
callback of another form (or "formspec shown from another
formspec"), the fields submitted for it can get
rejected by the form exploit mitigation subsystem with a
message like "'zorman2000' submitted formspec
('formspec_error:form2') but server hasn't sent formspec to
client, possible exploitation attempt" being sent to logs.
This was already reported as #7374 and a change was made
that fixed the simple testcase included with that bug
report but the bug still kept lurking around and popping
out in more complicated scenarios like the advtrains TSS
route programming UI.
Deep investigation of the problem revealed that this
sequence of events is entirely possible and leads to the
bug:
1. Server: show form1
2. Client *shows form1*
3. Client: submits form1
4. Server: show form2
5. Client: says form1 closed
6. Client *shows form2*
7. Client: submits form2
What happens inside the code is that when the server in
step 4 sends form2, the registry of opened forms is
updated to reflect the fact that form2 is now the valid
form for the client to submit. Then when in step 5 client
says "form1 was closed", the exploit mitigation subsystem
code deletes the registry entry for the client without
bothering to check whether the form client says was
closed just now is indeed the form that is recorded in
that entry as the valid form. Then later, in step 7 the
client tries to submit its valid form fields, these will
be rejected because the entry is missing.
It turns out the procedure where the broken code resides
already gets the form name so a simple "if" around the
offending piece of code fixes the whole thing. And
advtrains TSS agrees with that.
Reserve space for the list of games in findWorldSubgame. The
performance gain is pretty much negligible but this change
also gets rid of a performance warning by CLANG TIDY.
This patch will make distinguishable mods in modpacks possible in the future
`nil` checks are required to provide backwards-compatibility for fresh configured worlds
The craft definition handling code that collects the names of
the craftable nodes suffers from vector reallocation
performance hits, slowing down instances with lots of
crafting recipes (VanessaE's DreamBuilder and most public
server some to my mind when thinking about this). As in each
instance the size of the resulting vector is already known,
add a reserve() call before the offending loops to allocate
the needed chunk of memory within the result vector in one
go, getting rid of the overhead.
The pathfinder needs quite a bunch of items to add to the
resulting list. It turns out the amount of the space needed
for the finalized path is known in advance so preallocate it
to avoid a burst of reallocation calls each time something
needs to look for a path.
The code 'if [ -z ${something} ]; then ... fi' means "if
${something} is an empty string, yell at the command line
about 'binary operator expected' and ignore the body of the
if statement, if ${something} is not an empty string,
the condition is false so ignore the body of the if
statement" which clearly isn't what the author wanted. Fix
it by adding a few quotes around the offending ${something}.
* Fix a crash on Android with Align2Npot2
glGetString can be NULL. If stored in a string it triggers a SIGSEGV.
Instead do a basic strstr and verify the pointer
* Better Align2Npot2 check (+ performance)
* Fix various bugs (Anticheat, Lua helpers)
Anticheat: Use camera position instead of player position for shoot line calculations
Lua helpers: Increase 'i' to not overwrite earlier added table values
* Remove lag compensation
* * 1.5 for larger selection boxes
* PostgreSQL & SQLite3 doesn't setModified(false) on RemotePlayer, then player is saved on each server save call. This results in heavy useless writes.
* PostgreSQL & SQLite3 ack engine meta write whereas db commit hasn't been performed. If commit failed write has failed. We mustn't notify engine write is done.
* serializing player meta must not setModified(false) because it didn't ensure write has been done
* add RemotePlayer::on_successfull_save callback to do the flag update on a successful save
The fallback code shouldn't be needed and is a remnant of the GET
method that old media servers use. Clients using it are likely
to just waste bandwidth and having to download the media again
through the normal transfer from server method. The most reliable
method is to get all missing textures therefore from the server
directly and not spam the remote media server with 404s.
Previously, when the CSM restriction 'LOAD_CLIENT_MODS' was used a
client was still able to add CSM code to 'builtin' to bypass that
restriction, because 'builtin' is not yet verified.
Until server-sent CSM and verifying of 'builtin' are complete, make
'LOAD_CLIENT_MODS' disable the loading of builtin.
Clarify code comments and messages to distinguish between client-side
modding and client-side scripting. 'Scripting' includes 'builtin',
'modding' does not.
GCC and CLang compilers fail to support full IEC559 compliance required for the test, when certain compiler flags are active. This patch implements a heuristic that checks for the most common flag in GCC and CLang, plues an extra check which GCC disables when it's not compliant, to hopefully catch most cases where it can't run.
* Add missing tables of registered things
* Eliminate some duplication
Registration functions in 'Registered definitions' section merged into
'Registration functions' section.
* Misc. fixes
* Add privilege definition table
* Remove not-special soil group from special groups
* Merge two registration functions sections
* Move 'added to' information to tables section
Also fix some capitalization and missing periods
* Minor fixes
* Split Registration functions into two subsections
And update Registered definition tables to match order
* Fixes
Move star draw to before sun glow texture draw and before sun draw,
not currently essential but the logical order. Will be necessary if
a 'no far ground' option is added, to draw stars behind the sun.
```
[ 10%] Building CXX object src/CMakeFiles/minetest.dir/client/render/interlaced.cpp.o
cc1plus: warning: -Wabi won't warn about anything [-Wabi]
cc1plus: note: -Wabi warns about differences from the most up-to-date ABI, which is also used by default
cc1plus: note: use e.g. -Wabi=11 to warn about changes from GCC 7
```
Reported by GCC
```
minetest/src/server.cpp:996:42: warning: ‘peer_id’ may be used uninitialized in this function [-Wmaybe-uninitialized]
errorstream << "ProcessData: peer=" << peer_id << e.what() << std::endl;
```
Targets SDK 26 as required by the playstore.
Fixes screen auto-rotation closing game.
Hides on-screen navigation bar if present.
Update gradlew.
Fix display aspect on 18+/:9 displays (like a Samsung Galaxy S9).
Remove small app icons, not required.
Fix xml in unpacking activity.
Support Android permission: On Android 6.0+ you need to manually give write
permission (as required by google).
Background during unpacking (just a demo for now).
Material Design: no more Android 2 interface.
Immersive mode (Android 4.4+ - hide NavBar for fullscreen mode).
At sunset:
Stars first appear slightly later, at the time the sun disappears over the horizon,
this fixes seeing dark stars in front of the sun horizon glow texture.
Stars reach full brightness slightly earlier at time 20000, not so excessively long
after sunset.
The above behaviour is also applied at sunrise, but of course, time-inverted.
In pitch fly mode, you fly to the exact direction you are pointing at, using the forward key. Other move directions are also pitched accordingly.
It allows smoother and more complex movements.
Can be enabled/disabled by L key by default (set keymap_pitchfly in minetest.conf)
script_get_backtrace() was leaving its return value on the stack, corrupting
subsequent lua operations for functions that did not immediately return.
This problem can specifically be observed in the case of multiple "groupcaps"
entries, each of which provides the legacy "maxwear" property. These cause a
backtrace and thus pollute the stack for the following lua_next() call.
* Adds Lua methods 'set_rotation()' and 'get_rotation'. Also changed some method names to be more clear. Instead of an f32 being sent over network for yaw, now a v3f is sent for rotation on xyz axes. Perserved Lua method set_yaw/setyaw so that old mods still work, other wise to set yaw they would need to switch to set_rotation(0, yaw, 0).
Use the CSM death formspec when CSM is enabled and use the engine death formspec when CSM is disabled.
Move the CSM death formspec code to a dedicated file.
Works by detecting a collision while moving forward and then
simulating a jump. If the simulated jump is more successful,
an artificial jump key press is injected in the client.
Includes setting and key change GUI element for enabling and
disabling this feature.
Use font size 14 for phones.
Use x_inches < 3.7 instead of < 3.5 for small phones.
Add a new category x_inches < 6 for larger phones.
Use HUD scaling 0.85 for larger phones.
Use desktop defaults for tablets.
Previously, each glass face used drawAutoLightedCuboid() to draw a
flat cuboid. This also disallowed backface culling, making the
backface culling inconsistent with 'glasslike'.
Use code from 'glasslike' to draw glass faces using drawQuad().
Remove long-unknown top/bottom textures feature:
Makes the code simpler and cleaner.
Never documented, long-unknown and not of much use.
Add missing 'core.formspec_escape' to 'get_screenshot'.
Add warning label when no packages fetched.
Internal name of the "Update" button was the same as "Install". Rename to 'update_'.
Previously, 'time_brightness' never fell below the threshold so
night sky colours were not applied.
Increase the threshold value. But now also set it to a value less
sensitive to possible future small changes in 'time_brightness',
by setting it halfway between the 'time_brightness' values for
darkest night and first stage of dawn.
Calling string.split(":A:B:C:D", ":") returns an empty array.
This is due to first empty string not making repeat loop decreasing max_split which has a 0 value when reaching until.
Changing max_splits default value from -1 to -2 fixes that issue.
Create CPack WIX msi Installer for RUN_IN_PLACE=0 builds
Correct paths on Windows for RUN_IN_PLACE=0
Install only required font files
Games have their own components, and "minimal" is optional
Improvements:
1. Formspec size and description box are calculated last
2. Width and height are now adjustable per setting type
3. Error message (dialogdata.error_message) shortens the description field and is placed below
4. Add more spacing for larger fonts
5. More comments and extensible by setting different height and width values
Mods will now have to initialize the list/slot in order to define the default player hand.
They may use the inventory callbacks to prevent abuse of this list.
Improve codestyle.
Add clarifying comments.
Use 'movement_gravity' setting and physics override instead of hardcoded value.
Halve number of particles in final 'node dug' burst.
Avoid extremely small, near-invisible particles.
Increase velocity to increase number emerging from within a cubic node.
Previously, night clouds were almost indistinguishable from night sky,
especially since a recent commit that made night sky brighter.
They were lacking the beautiful luminosity caused by being lit by the
permanently-full moon.
When 'directional_colored_fog = false' allow the dawn/dusk cloud
brightness boost to apply through the night too.
Set an identical minimum cloud brightness for when
'directional_colored_fog = true'.
Damage flash is shortened from 0.98-1.27s to 0.25s-0.33s to reduce
player in-game blindness, especially useful for combat situations.
It is also visually more comfortable.
Camera hurt tilt is made slightly shorter to match in duration.
Both flash and camera tilt are now of similar length to a typical
damage sound, such as the one used by Minetest Game which is 0.27s.
The 3 effects become more synchronised and unified.
Previously dungeons > decorations > ores.
Decorations depend on the node they are placed on, and ore types are
increasingly able to place large continuous volumes of nodes, such as
strata. Decorations are increasingly being used underground.
The new order avoids a node being changed by ore generation after a
decoration has been placed on it.
The new order also avoids ores appearing in the walls of a dungeon if
the wall nodes match the local stone node.
Make tunnels wider and use the noise parameters of most other mapgens.
All other underground features are already identical to all other
non-mgv6 mapgens, this final change modernises and improves the tunnels.
Improve item types descriptions.
Add replacements field to fuel definition.
Shorten two headers.
Markdown fixes.
Remove extra example.
Add blank lines after headings.
Linkify section references.
Bracketed section names can be linked when compiled to HTML.
Also, use a better distance calculation for 'collide with objects'.
Fixes the issue of a vehicle occasionally colliding with its own driver,
causing one of the velocity components to be set to zero.
Remove ^ and --[[ ]] symbols.
Fix comment indentation level.
Separate fields with blank lines.
Remove period from single-sentence descriptions, add periods to
multi-sentence descriptions.
Separate inline comments from the code with two spaces.
* Fix textarea formspec documentation
The label is shown and the background isn't
* Document the missing gamma correction when generating mip maps
* Remove duplicate text (such as size parameter descriptions)
Add 2 new mapgen flags to make river depth variation and humidity drop
with altitude independently optional, instead of both being enabled by
the 'humid rivers' flag.
Simplify and clarify related code by removing a low priority
optimisation regarding 't_heat'.
Remove unnecessary optimisation bools and use spflags directly instead.
Improve and fix documentation in settingtypes.txt.
A few minor code cleanups.
Add missing section title for 'Node paramtypes'.
Clarify documentation for schematic Y-slice table.
Document that schematic Y-slice behaviour does not invert for ceiling
schematic decorations.
The code style linter is the most likely to fail, so should be
placed at the top of the list so it's started first. Note that
a failed job doesn't stop others from running
Also resync properly the dependencies versions.
Don't let the makefile handle the cleanups itself. Let gradle do it.
This is one of the first steps to remove the makefile and replace it with a full gradle support
* Modernize lua read (part 2 & 3): C++ templating assurance
Implement the boolean reader
Implement the string reader
Also remove unused & unimplemented script_error_handler
Add a reader with default value
Some cave segments are outside the mapchunk.
Previously, biome was being calculated by a function that uses the noise
maps. Points outside the mapchunk resulted in incorrect noise map indexes
that were sometimes outside the noise map size, causing a crash.
Use either noise maps or point noise calculations depending on point
location.
When the noise value or fill_ratio >= 10.0 complete coverage is enabled.
This disables random placement to avoid redundant multiple placements
at one position. Instead, 1 decoration per surface node is placed by
looping across each division.
'10' was chosen as this is the fill_ratio that previously created
very near complete coverage. The complete coverage feature therefore
integrates smoothly when noise is used for variable decoration density.
'fill_ratio = 10' should be used by modders who want a decoration
placed on every surface node. Compared to before such a decoration
placement will be 10 times faster.
* Few code updates
* Do not show average RTT before timing out
* Fix unwanted integer division in RTTStatistics
* Fix float format, prettier jitter calculation
* Use +=, 0.1f -> 100.0f for stronger average updates
Previously, the biomemap was 'BIOME_NONE' for a mapchunk column if a
stone surface was not found in it, causing water surface decorations
and water surface dust to fail.
Store the biome ID of the biome calculated at a water surface and add
it to the biomemap if the biomemap is 'BIOME_NONE' for the mapchunk
column. The biome calculated at a stone surface still has priority
for the biomemap entry, as it should.
Edit an incorrect comment.
Revert commit 99143f4947 and commit
f4ca830abe.
These commits caused biome dust to be applied even when there was no core
mapgen terrain in a mapchunk column. So the dust, which overgenerates,
then appeared on structures added by mods in 'on_generated', such as
floatlands, asteroids or above-surface realms.
Adding support for _NET_WM_PID as defined in Extended Window Manager Hints
Move verbose messaging to setupXorgTopLevelWindow method as Xorg messages should only occur when running in Xorg env.
Irrlicht returns the XDisplay as a void* and XWindow as an unsigned long so reinterpret those as the appropriate type. Also fixed a spaces for tab formating issue
* Minimal: Explicit log levels
* Minimal: Formspec test now disabled by default
This is done because the formspec test was disruptive.
This test can now be toggled with server command test_formspec first.
Previously the only way to disable biomes was to 'clear' the registered
biomes in a mod, but this method causes large amounts of unnecessary
processing:
1. Calculation of 4 2D noises.
2. Looping through all nodes of a mapchunk replacing nodes with identical
nodes.
The new flag disables those operations.
'generateBiomes()' constructs the biomemap as it generates biomes.
The biome calculated at first stone surface encountered is added to
the biomemap.
Previously, if no stone surface was encountered in a mapchunk column
the biomemap was left empty for that (x, z) position, causing biome
dust and water surface decoration placement to fail.
If at the base of a mapchunk column the biomemap is empty, add the
currently active biome to the biomemap, or if biome is NULL calculate
it for this position and add it to the biomemap.
In some configurations, such as when using the runit supervisor and its
tool chpst, the HOME variable might be unset. This resulted in an
unclear error message that was hard to pin down.
Fix 3 warnings reported by GCC 8.1 of the following type
```src/client/gameui.cpp:191:43: warning: « void* memset(void*, int, size_t) » effacement d'un objet du type non trivial « struct GameUI::Flags »; use assignment or value-initialization instead [-Wclass-memaccess]
memset(&m_flags, 0, sizeof(GameUI::Flags));
```
```
src/translation.cpp:43:16: warning: interception du type polymorphique « class std::out_of_range » par valeur [-Wcatch-value=]
} catch (std::out_of_range) {
```·
Because vein ore uses 3D noise (all the other ores use 2D noise) the
perlinmap Y size can be different in different mapchunks when close
to the ore Y limits.
Previously this caused bugs in the vein structure because changes in
perlinmap Y size did not recreate the noise objects.
Delete and recreate the noise objects with the new Y size if Y size
has changed.
Previously, the centering caused by the 'place center x/z' flags did
not take rotation into account. So schematics with unequal X and Z
dimensions were incorrectly placed. The bug was hidden for schematics
equal in X and Z dimensions.
Avoid crash in some situations when player is inside a node, causing
'above' to equal 'under'.
In this situation return 'under' which is the node position very close
to the face position that would normally be returned.
Add a new point to encourage discussion before coding. Move the 'ask
before significant coding' suggestion into this.
Edit and extend commit message guidelines. Refer to core dev commit
messages as good examples.
Remove 'short' and 'briefly' from the description guideline to try to
improve description quality.
Larger text for '### A pull-request is considered ..'.
Add a second roadmap link to celeron55's blog roadmap which is the 1st
part of the forum roadmap.
Add full stops to lists.
Consistent text size for '## Donations'.
* g_extrusion_mesh_cache new() and grab() to be managed in constuctor only (#7235 partial)
This global was getting grab()-ed by each call to getItemMesh, incrementing its reference count. What was to be the final drop() in the destructor ended up with > 0 reference count, so memory not freed by Irrlicht.
Previously, caverns confused tunnel generation causing biome top and filler
nodes to appear in caverns.
Split 'generateCaves()' into 2 functions to separate tunnel and large
randomwalk cave generation.
In each mapgen re-order cave generation to generate tunnels before caverns.
Split some long lines.
Edit comments.
Remove unnecessary comments and unnecessary commented-out code.
Use std::fmax/fmin instead of MYMAX/MYMIN.
Remove scope-limiting braces.
Consistently define literals as floats, except in noise parameters.
Cleanup literals in noise parameters.
Remove unnecessary 'near_cavern' line.
Reduce max spawn y to be consistent with other mapgens.
Caverns first appeared in mgvalleys and were later added to other
mapgens as shared code. Now this shared code can replace mgvalley's
internal cavern code.
Also use shared tunnel code instead of internal code.
Changes to mapgen that will affect existing worlds (mgvalleys is not
stable):
Single lava and water sources not added in tunnels.
Previous caverns are unchanged but an equal number of new ones are
added at a distance from the previous.
From y = -256 to 192 nodes below, where the caverns taper at their
upper limit, they will have a slightly different shape as the taper
is now linear.
Instead of calling g_settings->getBool("flag") multiple times
during each movement step, the current settings are cached
in a new player object member. Updated via registered callbacks.
* Android: Add zoom, minimap, and toggle chat button
Zoom button is put above jump button.
Minimap and toggle chat button are put in settings bar.
* Jump button is rotated down button
* Move three buttons on the right screen higher
Fix elusive 5 year old bug that caused mgvalleys large caves to be flat and
limited to mapchunk borders.
Error was fixed 2 years ago in 'CavesV6' but not in 'CavesRandomWalk'.
In the client, raise lower limit from 30 to 45 degrees, to avoid server
seeing this as a zoom and loading world beyond the server-set limit.
Add minimum in settingtypes.txt and enforce lower limit when set using
minetest.conf.
In the server, distrust the client-sent FOV if below the heuristic zoom
threshold and use the player object property 'zoom_fov' to check it, to
protect against hacked clients.
* Android: Replace movement buttons with joystick
Replace movement control buttons (arrows at bottom left screen) with virtual joystick.
Joystick has 8 directions (same as keyboard). Basically, just map it to keyboard input.
Joystick applies only on left 1/3 of screen.
Joystick's position can be fixed by enabling fixed_virtual_joystick setting.
Three new images:
(1) placeholder joystick,
(2) joystick container (background), and
(3) joystick cursor.
Remove unused images: movement control buttons (*_arrow.png).
New data type: touch_gui_joystick_move_id
Joystick's fixed position is spaced one button size from bottom and from left of screen.
Remove unused variable: m_joystick_downlocation
Fix for incorrect translation of empty strings
In the key change menu, when a button key not have name an empty string is passed to gettext.
The empty string is reserved for gettext to return de header of the .po file an this is shoved in the button
Commit 5070ca2111 changed sun colour by
fixing what seemed to be a code mistake.
Return to the standard colour but comment-out the first assignment of the
double-assignment for performance.
Add a comment to explain.
Add new biome fields 'node_dungeon', 'node_dungeon_alt', 'node_dungeon_stair'.
If 'node_dungeon' is not defined dungeons fall back to classic behaviour.
Remove messy and imprecise dungeon material code from 'generateBiomes()'.
Code deciding dungeon materials is now in 'generateDungeons()' and uses the
biome at mapchunk centre for more precision.
Remove hardcoded 'MG_STONE' types as long intended.
* Promote performance-type-promotion-in-math-fn as a coding error
* Promote performance-faster-string-find too (which is not problematic currently)
* Same for performance-implicit-cast-in-loop
* Fix remaining tidy points
* src/sky.cpp 146 warn V519 The 'suncolor_f.r' variable is assigned values twice successively. Perhaps this is a mistake. Check lines: 142, 146.
* src/sky.cpp 147 warn V519 The 'suncolor_f.g' variable is assigned values twice successively. Perhaps this is a mistake. Check lines: 143, 147.
* src/sky.cpp 148 warn V519 The 'suncolor_f.b' variable is assigned values twice successively. Perhaps this is a mistake. Check lines: 144, 148.
* src/threading/thread.cpp 63 err V730 Not all members of a class are initialized inside the constructor. Consider inspecting: m_thread_obj.
* src/server.cpp 3243 err V595 The 'log' pointer was utilized before it was verified against nullptr. Check lines: 3243, 3258.
* Use constexpr + unroll some calculations to cache definitively some calculations
* Unroll some calls in collision code & use a constref instead of a copy in one occurence
* Fix many issues reported by clang-tidy
We have many issues in code related to some performance to float <-> double.
Clang-tidy reported it in performance-type-promotion-in-math-fn
I fixed many of them. It's not ready for a promote to blocking
Also fix some value which should be const-ref
* Implement new travis clang-tidy build step
* This step enable some rules and enforce one rule as error
* This permits to have some C++ quality rules based on clang & clang contributor guidelines
* Fix clang-tidy reported problems on push_back -> emplace_back
* Drop EventManager from GameDef & do some client cleanups
* EventManager is only used by Client. Don't expose it on Server & GameDef for nothing
* Drop Client::event() in favor of direct calls to getEventManager
* Cleanup some event put from new + put to put(new)
* MtEvent: add Type(u8) enum
* This will enhance event performance & ensure stricter type
* Drop MtEvent::checkIs (unused)
* clang-tidy reported fixes
* Code style
* Move event_manager.h to the client directory as it's only used by client
Add EventManager unittests + switch to unordered_map as order is not important here
Drop a unused function
minetest/src/script/cpp_api/s_player.h:27:1: warning: struct 'PlayerHPChangeReason' was previously declared as a class [-Wmismatched-tags]
struct PlayerHPChangeReason;
* Cleanup sound manager client
* Use some const refs
* Use auto on iterators
* Drop unused parameters
* Move sound_openal.* to client folder
* Move sound.cpp + OnDemandSoundFetcher to client/ folder + reorganize includes properly
* Server: delegate mod management & config to ServerModConfiguration (rename it to ServerModManager)
* Use c++11 range based loops
* Add unittests + experimental/default mod as a test case to permit testing mod loading in future tests
* isFreeServerActiveObjectId is now part of ServerEnvironment
* getFreeServerActiveObjectId is now part of ServerEnvironment
* StaticObject constructor now take ServerActiveObject instead of type + string. This permits to remove a big string copy in some code parts
* ObjectRef::set_local_animation: fix wrong lua return (should push a boolean, currently returns nil)
* ObjectRef::set_eye_offset: fix wrong lua return (should push a boolean, currently returns nil)
* Fix various Server functions which depends on RemotePlayer objet and return true/false when player object is nil whereas it's a caller implementation error. Change those bool functions to void and add sanitize_check call instead. Current callers are always checking player object validity
* Optimize Server::setClouds : use CloudParams object ref instead of attribute deserialization from structure & perform RemotePlayer::setCloudParams directly in server class like many other calls
* Optimize Server::SendCloudParams: use CloudParams object ref instead of deserialized attributes
Use the --color command line parameter instead of a setting for coloured logs
This fixes the missing warningstream bug, g_settings->get mustn't be used there.
Also, the decision about en- or disabling log colours fits better to the command line parameters than minetest settings.
Change to --worldlist instead of --world list.
Gets rid of --worldpath parameter added as part of this pull request,
instead moving the listing function to a command --worldlist that
accepts either name, path, or both and prints out the corresponding
information.
Returns the decoration ID for the provided decoration name string.
For use with gennotify, to know the decoration IDs for use in
'minetest.set_gen_notify'.
Delay was converted from the param string and not the delay value, thus never using the actual given delay value when used in combination with other string values in the param, in this case reconnect and the shutdown messsage.
This doesn't check the fields in anyway whatsoever so it should only be seen as a way to mitigate exploits, a last line of defense to make it harder to exploit bugs in mods, not as a reason to not do all the usually checks.
Previously only 'mapgen water source' and 'mapgen river water source'
were checked for. Games can use multiple liquid nodes defined for biomes,
many of which will not be aliased to those 2 mapgen aliases, causing
floating dungeons to generate in some liquids.
Now we check for liquid drawtype instead, so can remove liquid nodes
from dungeonparams.
Also check for 'airlike' drawtype instead of 'CONTENT_AIR' to avoid
generation in 'airlike' nodes in some rare situations. This will also be
needed for when we add definable biome air nodes.
Prevents falling node entities entering the ignore at a world edge and
resting on unloaded nodes 16 nodes below, unreachable, undiggable and
still being processed by 'on step' because they don't revert to nodes.
* Rename IWritableNodeDefManager to NodeDefManager
* Make INodeDefManager functions const
* Use "const *NodeDefManager" instead of "*INodeDefManager"
* Remove unused INodeDefManager class
* Merge NodeDefManager and CNodeDefManager
* Document NodeDefManager
* Add minetest.bulk_set_node call + experimental mod unittest
* Optimize set_node function to prevent triple lookup on contentfeatures
Do only one lookup for old, and try to merge old and new lookup if node is same than previous node
* Add benchmark function + optimize vector population to have real results
The CSM HUD PR caused some strange behavior including aborts due to parts of it using some slightly hacky code, the event refactor changing how events are processed and a minor oversight.
The following languages exist in Minetest PO folder were missing from the selection menu:
- dv (Dhivehi)
- ms (Malay)
- sl (Slovenian)
- sv (Swedish)
- sw (Swahili)
A useful function that applies 'core.is_protected()' to a 3D lattice of
points evenly spaced throughout a defined volume, with a parameter for
the maximum spacing of points.
* Make InputHandler own the key cache
* Add a helper function InputHandler::cancelPressed to avoid multiple similar calls in game.cpp
* Move RandomInputHandler::step definition into cpp file
Joystick input is a RealInputHandler only usage, make it intelligent and handle the joystick with keyboard direct.
This permits to remove many getters in game which should be owned by RealInputHandler
* Attempt to add registration confirmation
Using SRP auth mechanism, if server sent AUTH_MECHANISM_FIRST_SRP that means the player isn't exist.
Also tell player about the server and chosen username.
Local game has localhost as IP address of the server.
Add RenderingEngine::draw_menu_scene() to draw GUI and clouds background.
aborted -> connection_aborted
* Rewrite information message text
Client::promptConfirmRegister() -> Client::promptConfirmRegistration()
Other enhancements:
* Simplify setStatusText to showStatusText, as it shows the label too (preventing almost every setStatusText to call setStatusTextTime(0)
* Add unittests
Game class is too huge and has too specialization on various subjects, like UI, formspecs, client, renderer. Start to move UI related things to GameUI object and cleanup them
Other improvements:
* updateChat: more performance on error messages by remove string copies
* Initialize all game class members in definition instead of constructor (with nullptr instead of NULL)
* Drop unused Client::show{GameChat,GameHud,Profiler,GameFog}
* Add GameUI unittests
* [CSM] Don't load the IO library.
* Rename the function to match the Lua API function name and add a missing `const`
* Add a comment to explain some strange code and fix the other issues pointed out by shadowninja.
The `disconnected_*` boxes are the opposites of the `connect_*` ones,
i.e. when a node has no suitable neighbours on the respective side, the
according disconnected box is drawn.
* disconnected_top
* disconnected_bottom
* disconnected_front
* disconnected_left
* disconnected_back
* disconnected_right
* disconnected (when there is *no* neighbour)
* disconnected_sides (when there are *no* neighbours to the sides)
This still leaves plenty of data undecoded, but just having the packet
types all covered 100% for 0.4.16 will make looking at traces a lot
simpler than seeing half the packets show up as unknown.
* Add player deletion method to auth handler (fixes#6653)
* Support iterating over the auth database
There was no way to do this previously and a recent commit
broke doing this the "hacky" way by accessing `core.auth_table`.
Fixes#6676.
Allow animated meshes to be cached in Irrlicht's builtin mesh cache.
Use Material.EmmissiveColor instead of manipulating the mesh' vertex colors.
Remove player object property 'can zoom'.
Add player object property 'zoom fov'.
Remove clientside setting for 'zoom fov'.
Object property default is 15 degrees in creative mode, zoom disabled
in survival mode.
Needed due to zoom now loading and/or generating distant world
according to zoom FOV.
Update object properties serialisation version to 3.
See #6667
By setting active_object_send_range_blocks > active_block_range a server admin
can allow clients to retrieve active objects futher out from the player at
relatively low cost to the server
(only objects in the players' view cone are considered).
Solves some issues with ModStorage functionality in mapgen threads
that occurred when mapgen threads continued to run after the main
server thread had stopped. Also shuts down mapgen threads before
shutdown callbacks are called.
Properly document it instead of referencing the builtin handler as
authoritative "example" code.
Also adds definition of get_auth_handler() which was missing previously.
For consistency, and for much improved access on Github.
On Github:
.md disables being able to link to a line, needed daily when
quickly referring people to particular lines.
Search returns results in .md files, but you cannot then click
the line number to go to that line in the document, making searching
difficult.
Line numbers are not displayed for .md documents.
"diffferent" to "different"
"occuring" to "occurring"
"determin" to "determine"
"ommited" to "omitted"
"authetification" to "authentication"
"conponent" to "component"
"ommitted" to "omitted"
"celcius" to "Celsius"
"succesful" to "successful"
Misspellings found using GNU Spell version 1.0
Allowing scrolling with the mousewheel when the vertical scrollbar is
hidden, unnecessarily exposes oversized containers and newlines at the
end of the text. For example try scrolling over the textareas in the
pause menu. This PR addresses the issue by requiring the scrollbar to be
visible before allowing the scrolling with the mousewheel.
No longer decide placement on 'buildable_to' parameter.
Dust nodes only look acceptable placed on cubic nodes.
Modders may not want to make their plantlike decorations 'buildable_to'.
Falling nodes should make a sound. This can only be done here,
so for simplicity we just call the sound_play() here with the node
place sound. We ignore any gain value in the sound spec since a
falling node should be loud, so the 1.0 default gain makes sense
here.
We try to use default fallback for both mono and main font when custom font path is not exist. This way, if Minetest is not corrupted, we could avoid crash.
Add "all_floors" and "all_ceilings" flags for simple and schematic
decorations. Decorations are placed on all floor and/or ceiling surfaces.
Decorations are placed before dungeon generation so placement in dungeons
is not possible.
Add 'getSurfaces()' function to mapgen.cpp that returns 2 arrays of y
coordinates for all floor and ceiling surfaces in a specified node column.
Move 'getHeight()' checks into DecoSimple and DecoSchematic. Delete
'getHeight()' functions.
* Fix default item callbacks to work with nil users
* item.lua: Handle node drops for invalid players
The if-condition for the dropping loop is the same as `inv`, which means that the 2nd possible definition of `give_item` is never used.
Remove redundant `local _, dropped_item`
This causes blocks in front of the player to be rendered sooner and
blocks in the periphal view (that would soon be out of view) a bit later.
Overall this leads to smoother rendering as the player is moving around.
Formspec input for each individual noise parameter and flag.
Allow noise flags to be set in advanced settings, previously only settable
in minetest.conf.
Standardise 'group format' for noise parameters set in minetest.conf, as
only these support noise flags. However the older 'single line' format is
still accepted to support existing minetest.conf files.
Therefore auto-generate minetest.conf.example with noise parameters in
'group format'.
Setting 'type' in settingtypes.txt is now either 'noise_params_2D' or
'noise_params_3D', the dimension number is displayed in the advanced
settings edit page.
This helps retrieving the right set of blocks when the player is falling,
traveling on cart, or in general traveling in a direction different from
the view direction.
Necessary for placing the base cube of 'plantlike_rooted' drawtype in the
seabed instead of on it.
Useful for placing decorations sunk into, or buried in, the ground.
For solid nodes, the lighting at a corner becomes face-dependent, which
means that only the four nodes in face-direction contribute to the
lighting (getSmoothLightSolid).
For special nodes, which use the lighting values at the eight corners of
a node, the lighting is not face-dependent, but certain nodes of the
eight surrounding nodes of a corner (here indices 4, 5, 6 and 7) can be
obstructed.
Ambient occlusion now also occurs for solid nodes, if two, three or four
of the four nodes in face-direction are solid.
In some cases NetworkPacket was created using default constructor and m_data is not properly sized.
This fixed out of bounds memory copy
Also use memcpy instead of std::vector affectation to enhance packet creation
If 'param2_max' is not used, parameter 'param2' works as before for
compatibility.
If 'param2_max' is used, 'param2' and 'param2_max' become the lower
and upper bounds of a per-decoration random param2.
Increase scrollrate depending on fontsize
Scroll on mousewheel
Allow scrolling and marking text on non writable textareas
Update lua api about readonly mode
Show scrollbar if text overflows
If either of the 2 noise parameters are omitted the ore will occur from y_min
to y_max in a simple horizontal stratum. As this does not compute noise
performance improves, and is ideal for placing many layers.
Clean up some nearby ore documentation.
* Make Player::peer_id server-side only and add getters and setters
Player::peer_id has no sense client side, move it to server, make it private and add setter and getter
Also add some PEER_ID_INEXISTENT instead of harcoded 0
* Add no_static_save property to luaentites to not save them statically.
This allows for temporary objects that would get deleted anyway as soon as they are loaded again without the static saving overhead.
* Use positive meaning for static_save object property
* Invert meaning also for the LUA parameter
Note: getboolfield() does not change &result when field does not exist, so it defaults to the default value in the header file, which is 'true'.
* Extend push_object_properties()
* Add session_t typedef + remove unused functions
u16 peer_id is used everywhere, to be more consistent and permit some evolutions on this type in the future (i'm working on a PoC), uniformize u16 peer_id to SessionId peer_id
* Update JsonCPP to 1.8.3
* Fix deprecated functions
Json::FastWriter, Json::StyledWriter and Json::Reader are marked deprecated since 1.1 and are deprecated in 0.8 but not shown at compilation time.
Use new methods to serialize/deserialize
Implement network communication for channels
* Implement ModChannel manager server side to route incoming messages from clients to other clients
* Add signal handler switch on client & ModChannelMgr on client to handle channels
* Add Lua API bindings + client packet sending + unittests
* Implement server message sending
* Add callback from received message handler to Lua API using registration method
Change OpenAL distance model from AL_INVERSE_DISTANCE to
AL_INVERSE_DISTANCE_CLAMPED to avoid excessive volume when very close
to the sound location, for example MTG doors, and MTG fire sounds which
are combined at an average position and often located in air nodes.
Because AL_REFERENCE_DISTANCE has been reduced to 1 node (the distance
under which gain is clamped), multiply volume by the same factor to keep
sound gains the same as before, since the gain is calculated as:
gain = (AL_REFERENCE_DISTANCE / distance)
Feature is unnecessary and would greatly complicate future development,
it would also make 'get biome at pos' extremely complex.
Mgv7: Revert option to repeat surface biomes in floatlands, which
depended on the above.
Error was exposed by commit a1389c3865
'nplaced' was not set to U16_MAX when biome 'stone' was placed, so when
biome was recalculated in a column of stone, the 'nplaced' value
caused a few remaining filler nodes to be placed.
Occurs when the lower biome has a deeper depth of 'top' plus 'filler'
than the upper biome.
For 3D noise tunnels only, replace unsupported biome 'top' and 'filler'
nodes in tunnel roof with the defined biome 'stone'.
This makes terrain created by 3D noise tunnels consistent with the rest
of mapgen, which does exactly the same in this situation.
The 'glow' value is added to the ambient light value.
Negative 'glow' disables light's effect on object colour, for faking
self-lighting, UI-style entities, or programmatic colouring in mods.
Dig prediction allows clients to remove dug nodes without
waiting for server acknowledgement.
This patch allows mods to override dig prediction,
it can either be turned off or a different "prediction node"
can be selected.
* Abort set_item when it does nothing
* Do not adjust dropped item size linearly
Instead use cube root because the item count is proportional to the volume, not to the length.
* Make the item rotate slower when it's bigger
Bigger items chafe more on the ground, so they can't rotate as fast as small ones
* Fix items flying in air
For precise control of schematic vertical position relative to the
'place_on' node.
Avoids workarounds that add empty nodes to a schematic and therefore
reduce performance.
Also remove long-unused decoration cutoff code.
* Implement minetest.register_on_userlimit_check
This new callback permits to bypass the max_users parameter with new mods condition, based on player name or IP
Only one mod needs to permit it.
Move core part for builtin privileges checks to builtin
Creates a single undulating ore stratum that is continuous across mapchunk
borders and horizontally spans the world.
Due to being continuous is ideal for creating bands of alternative stone
type running through cliffs and mountains, or underground layers.
Add missing documentation of 'ore_param2' parameter.
* Fix animation frame_speed and blend loosing precision due to incorrect data type
Add lua function set_animation_frame_speed to update the frame speed without resetting the animation to start
* Fix HP transport + some double <-> float problems
TOCLIENT_HP transport u16 hp as a u8, use u16 HP, this prevent HP over 255 to overflow across network
* Fix more double/float problem in serverpackethandler & remove implicit struct type for TileAnimationParams
* Fix connection unittests container
* Formspec: Add options to set background color and opacity (fullscreen mode)
* Enhance previous comment: Set formspec background when regenerate UI.
* This permit to do the calcul only at regen and override it with bgcolor tag
* Add a setting for default background color into formspec, separated from fullscreen
* Add a little performance gain on formspecs using a const ref instead of copying formspec string
Move client 'controls', 'graphics' and 'sound' into the first level to be
immediately visible to players who may not realise these come under 'client'.
These are the settings that new players or players on a server are likely to
want to access while not having understanding of what comes under 'client'.
Leave client 'network' and 'advanced' under 'client' as these are more
advanced.
Move 'show entity selection boxes' from the bizarre location in
'client'>'network' to 'graphics'>'in game'>'advanced'.
* Refactor clientevent structure
* Move structure outside of client header
* Create client events on heap not stack, this remove the ClientEvent object copy
* Use clientEventHandler to route events
* Alternative code for slipping
- does not depend on frame rate
- controllable via environment variables for now
* Adjust slipping speed for item entities too.
* Final version of framerate-independent slippery code
* Remove dead code and fix formatting
* getStandingNodePos should only look 0.05 nodes downwards
This ensures that, even if the player is standing on a partially
filled node, this node is used as the standing node and not the
node below it.
Specific use: enables slippery slabs
* Exchange global getStandingPosNode change for local inline change
Reverts previous commit
* Revert the item movement changes
* Slippery nodes now slip over cliffs and edges
Players no longer suddenly stop before falling off.
Also refactored slippery code into getSlipFactor method.
* Slipping over an edge gated by player's is_slipping state
A new flag for just this case, to reduce costly node lookups in
the normal case of leaning over a non-slippery edge.
Public access for consistency and potential future uses.
* Minor code tweaks / cosmetics
* Add temp variable to improve readability and fix indentation issues
* Move Connection threads to dedicated files + various cleanups
* ConnectionReceiveThread::processPacket now uses function pointer table to route MT packet types
* Various code style fixes
* Code style with clang-format
* Various SharedBuffer copy removal
* SharedBuffer cannot be copied anymore using Buffer
* Fix many SharedBuffer copy (thanks to delete operator)
* Setting: Safe digging and placing
* New setting 'safe_dig_and_place' under Controls
* If set, digging and placing will not auto-repeat
* Releasing buttons unblocks the respective action again
* Useful for inexperienced users in creative mode where default
repeat times may be too short
* Safe placing (right click repetition) does not need a guarding flag
* Added new setting to minetest.conf.example
* Cleanup network headers
* Move peerhandler to a specific header to reduce compilation times
* Move socket.cpp/h to network folder
* More work
* Network code cleanups
* Move socket.{cpp,h} to network folder
* Move Address object to network/address.{cpp,h}
* Move network exceptions to network/networkexceptions.h
* Client: use unique_ptr for Connection
* Server/ClientIface: use shared_ptr for Connection
* Format fixes
* Remove socket.cpp socket.h from clang-format whitelist
* Also fix NetworkPacket code style & make it under clang-format
* Respect object property hp_max field for players
This allows modders to configure the maximal HP per player
* Statbars: Downscale bar to full 20 HP when exceeding this value
Add default max HP for players and breath constants to builtin
Document the constants
* Rename PLAYER_MAX_HP -> PLAYER_MAX_HP_DEFAULT
the BS constant
implicitly promotes all position calculations it is used in to double even
though positions (= v3f) are only meant to be floats.
There are many, many similar occurrences everywhere, but I'm not willing to
hunt down all; I only fixed the little part I'm already familiar with.
* common.sh: fix travis-ci build bugs
install_macosx_deps: check if jpeg is installed, if not - upgrade it.
needs_compile: Check if $TRAVIS_COMMIT_RANGE is valid, if not, rewrite
the range with the correct one, and fix git ambiguous argument error.
* Changed detection method and removed commments
* Version changes: current dev version is now 0.5.0
* This change permit to have multi branches with various versions
* Dev version is 0.5.0-dev and next release will be 0.5.0
* Modernize source code: last par
* Use empty when needed
* Use emplace_back instead of push_back when needed
* For range-based loops
* Initializers fixes
* constructors, destructors default
* c++ C stl includes
* Code modernization: subfolders
Modernize various code on subfolders client, network, script, threading, unittests, util
* empty function
* default constructor/destructor
* for range-based loops
* use emplace_back instead of push_back
* C++ STL header style
* Make connection.cpp readable in a pointed place + typo
* remove sector meta loading/saving from files which targets dead code (differs_from_disk is always empty)
* this remove empty ServerMapSector and ClientMapSector, remove MapSector childs
* empty function
* default constructor/destructor
* for range-based loops
* use emplace_back instead of push_back
* remove some unused headers in some cpp variable
* empty function
* default constructor/destructor
* remove unused Map::emergeSector(a,b)
* for range-based loops
* migrate a dirs[7] table to direction tables
* remove various old unused function
* Make world creation menu automatically generate a name.
* Name is now initialy empty, and generated if player tries to create a world without a name.
* Modernize various files (src/m*)
* range-based for loops
* code style
* C++ headers instead of C headers
* Default operators
* empty function
Thanks to clang-tidy
* server.cpp: unroll setting when sending mapblocks
* Improve a little bit performance when sending mapblocks massively
* Use a range based for
* Code style fixes
* clientobject, clouds, collision, clientsimpleobject: code modernization
* use range-based for loops
* simplify some tests
* various code style fixes
* use emplace_back instead of push_back when necessary
* use auto on some iterators
* use default operator when needed
* unroll v3s16 creation on collisionMoveSimple
Minetest performance improvement has been huge since months, server step reduction will permit to handle client events a little bit faster without too many penalty costs due to core engine
* use range-based for loops
* simplify some tests
* various code style fixes
* remove debugprint in ClientMap::getBackgroundBrightness, debug code was not intended to be there
* remove unused fields in MapDrawControl
* use emplace_back instead of push_back when necessary
* ClientInterface: add a function to verify (correctly) if user limit was reached
CS_HelloSent is a better indicator of active slots than CS_Created, which are session objects created after init packet reception
Switch existing checks to ClientInterface::isUserLimitReached()
Use range-based for loop for getClientIds() used function too
This will fix#6254 (not the memory overhead if init is flooded)
* Various code style fixes
* Use range based for loops
* Use empty instead of empty objects
* Use C++11 default keyword for trivial constructors and destructors
* Drop some useless casts
* Use emplace_back instead of push_back to improve performance of some vectors push
* Use more for range based loops
* Simplify some tests
* Code style fixes
* connection.h: better PeerChange constructor instead of creating uninitalized object and then affect variables
* Use various modern for loops
* Make some loop iterator constants, whereas there weren't
* Use empty on some size() > 0 tests
* Various little codestyle fixes
* Fix an hidden scope variable in Server::SendBlockNoLock
* Use Environment interface instead of ClientEnvironemnt
* Don't create slippery variable and then re-affect it
* itemgroup_get return a int, properly test != 0 to be clearer
Use various ranged-based for loops in ServerEnvironment::step
Also set ServerObject::getBasePosition const to be compliant
ServerEnvironment::deleteParticleSpawner: use a const iterator
The arrow symbolizing the player in the square minimap looks almost like a
triangle, making it a bit hard to see which direction it is currently
pointing in when in a hurry.
Redraw it leaner, pointier. Colors unchanged.
When minetest is launched, if there was no nameprovided in
configuration or parameters, the game would not show any error in
console. if the --go parameter was also prowided, the game would
exit without an error. This is undesired behavior, so this merged
commit add the missing function that displays the missing error
message in console.
Gives starting singleplayer games this subtle "dawn of a new world" feel.
I would have set it even earlier (up to 4:45am), but I was worried that in
some pre-existing games the player could be overwhelmed by hostile
mobs right at the start, seriously changing gameplay.
It's just the default, individual games should be able to override it, and
for public servers it's irrelevant anyway, because only the first player to
set foot in the world will notice, and that's usually the server admin.
Another small general problem: the player is always standing exactly on the
bondary between 2 nodes e.g. Y=1.5 is exactly between nodes Y=1 and Y=2.
floatToInt() and myround() will round +/-n.5 always 'outwards' to +/-(n+1),
which means they behave differently depending on where you are: they round
upwards above sea level and downwards when underground. This inconsistency
comes from the way the coordinates are calculated, independent of the
specific C++ code.
The result is a tiny bit of lost performance when moving underground,
because 1 node level more than necessary is checked for collisions. This can
be amended by adding a tiny offset to minpos_f.Y, like @paramat suggested.
This is not an elegant solution, but still better than wasting CPU.
To determine the area (nodes) where a player movement took place
collisionMoveSimple() first took the old/new player coordinates and rounded
them to integers, then added the player character's collision box and
implicitely rounded the result. This has 2 problems:
Rounding the position and the box seperately, then adding the resulting
integers means you get twice the rounding error. And implicit rounding
always rounds towards 0.0, unlike floatToInt(), which rounds towards the
closest integer.
Previous (simplified) behavior: round(pos)+(int)box, for example player at
Y=0.9, body is 1.75m high: round(0.9)+(int)1.75 = 1+1 = 2.
==> A character's height of 1.75m always got rounded down to 1m, its width
of +/-0.3 even became 0.
Fixed by adding the floats first, then rounding properly: round(pos+box) =
round(0.9+1.75) = round(2.65) = 3.
Construct dungeons from the node defined as biome 'node_stone' if
'mapgen_stone', 'mapgen_desert_stone' and 'mapgen_sandstone' are not
detected.
Feature long-intended by kwolekr/hmmmm and present in code as a TODO.
Move point at which light is sampled up to 0.5 nodes above foot level,
to avoid that point sometimes passing into the node below causing the
model to go dark.
The getBackgroundBrightness() function detects darkness in the view direction
to decide when to make the skybox dark. The volume checked was too narrow and
missed the left and right edges of the view, too easily causing a dark skybox.
Widen the checked volume to match a FOV of 72 degrees and a 16:9 aspect ratio
game window.
Remove usage of the SharedBuffer in zlib compression which has two problems:
* We copied the whole memory block to compress it (not good with mapblocks)
* We copied sometimes strings to SharedBuffer to SharedBuffer (2nd time)
Use this method in MapNode::serializeBulk + optimize serialization but merging 3 identical loops in a single loop
correctBlockNodeIds does 2 lookups for each loaded node, one to translate DB ID to name and a second to translate name to real ID. Name to real ID is very consumming if done on every node. As mapblocks are in most cases composed of many identical adjacent nodes, cache previous source and destination id and use them on the next node to prevent any lookup on those maps.
This reduce the function load from 15% of my CPU usage to ~0.7%, on the test, calls was reduced from 2.5M lookups to 42k lookups, it's a huge performance gain
* TileLayer: use shared_ptr for vector framespec
This reduce memory copy of TileLayer from (4 to 16) * FrameSpec where FrameSpec = (sizeof(int) + 3 * sizeof(ptr)) to int + sizeof(ptr)
Callgrind difference
Before: https://lut.im/RGkiJqQb8T/LeQIEXpAuRzfl7gd.png
After: https://lut.im/bcqmwee1xu/cTwtptY5tRuS9lp0.png
* Fix one push_back to use vector::emplace_back & optimize inclusions
* VoxelManip cleanups (const ref, const move) permitting to improve a little bit performance
* VoxelArea: precalculate extent (performance enhancement)
This permits to reduce extend high cost to zero and drop many v3s16 object creation/removal to calculate extent
It rebalance the client thread update to updateFastFaceRow instead of MapBlockMesh generation
This will also benefits to mapgen
Allows setting of the mountain 'zero level' (y where density gradient is zero).
It is easy to vertically shift smooth terrain by editing noise parameter 'offset',
but vertically shifting mountain terrain was complex and imprecise, involving
making a calculation based on an average of the mountain height parameter.
Ensure in-cloud fog is always stronger than outside-of-cloud-fog even when
using a small view range.
Also limit in-cloud fog range to a maximum of 32 nodes to keep it fairly
strong when using a large view range.
The change from 800x600 to 1024x576 (16:9) was a reduction in height which caused
user interface to become smaller.
Continue to use width 1024 as it is a common small screen width.
* [CSM] Add flavour limits controlled by server
Server send flavour limits to client permitting to disable or limit some Lua calls
* Add limits for reading nodedefs and itemdefs
* flavour: Add lookup node limits
* Merge get_node_or_nil into get_node.
Sending fake node doesn't make sense in CSM, just return nil if node is not available for any reason
* Add node range customization when noderange flavour is enabled (default 8 nodes)
* Limit nodes range & disable chat message sending by default
* Bump protocol version
Spawn player 1 node higher to avoid spawning waist-deep in a possible
biome 'dust' node, such as tundra snowblock.
Tune default offset to spawn players in a more interesting location on the
mandelbrot sets, on a raised area that looks like a spawn platform.
Tune julia parameters to help avoid spawn search failing, especially for
fractal 6.
For consistency return to 'FPS =', add comma before FPS.
Remove 'R' from 'range_all' as may be re-keymapped.
Remove inconsistent brackets from 'range_all'.
Change 'v_range' to 'view_range'.
Add 'pos = ' before co-ordinates.
Add spaces around '=' in yaw display.
Remove brackets from around 'yaw' and 'seed'.
Move 'pointing_at' to 3rd line.
Remove 'param1' (0 for all solid nodes and unreadable for light sources due to
light bank encoding).
Remove file name of pointed node top tile (this also removes the need to get
ContentFeatures for the node, slightly improving performance).
Replace quotes around node data with brackets, looks better and more consistent.
Add 'guitext3' for third line.
Use 'setVisible' for all 3 lines to control the setting of each text rectangle.
Improve logic of 3rd line to only run code it needs to depending on whether
pointing data is avaialble and whether node is not 'ignore' and not 'unknown'.
* New TOCLIENT_CHAT_MESSAGE packet
* Rename old packet to TOCLIENT_CHAT_MESSAGE_OLD for compat
* Handle TOCLIENT_CHAT_MESSAGE new structure client side
* Client chat queue should use a specific object
* SendChatMessage: use the right packet depending on protocol version (not complete yet)
* Add chatmessage(type) objects and handle them client side (partially)
* Use ChatMessage instead of std::wstring server side
* Update with timestamp support
Fix taking damage caused by sneaking over a nodebox gap.
Fix strange behaviour on stair nodeboxes.
Enable jumping from node edges while sneaking.
Enable movement around corners while sneaking on a 1-node-high groove in a wall.
Add 'biome_zero_level' argument to 'generateBiomes()', 'deco_zero_level'
argument to 'placeAllDecos()' and 'ore_zero_level' to 'placeAllOres()'
to allow mapgens to vertically shift the registered biomes, decorations
and ores per-mapchunk.
Will also allow many realm possibilities in future mapgens.
Useful for underwater plants.
Node consists of a base cube plus a plantlike extension that can pass through
liquid nodes above without creating air bubbles or interfering with liquid flow.
Uses paramtype2 'leveled', param2 defines height of plantlike extension.
This commit introduces Raycast, a Lua user object, which can be
used to perform a raycast on the map. The ray is continuable, so one can
also get hidden nodes (for example to see trough glass).
Fixes issue #3576
* Clouds now take camera position as 3D, not 2D
* Cloud grid filling extracted to gridFilled method
* Clouds detect whether camera is inside cloud
* Camera in cloud changes fog by overriding sky colors
with cloud color
* Sun, moon and stars can be temporarily disabled
with setBodiesVisible
* Disabling fog also disables all "inside cloud" behaviors
Allow `core.copy_dir` (main menu API) to copy directories from a
non-Minetest location. The check to disallow copying to non-Minetest
locations is retained.
* Irrlicht cleanup: cleanup various object to use RenderingEngine
* CAO doesn't need scenemanager in addToScene
* Camera doesn't need VideoDriver pointer or SceneManager in constructor
* Hud doesn't need driver & scene manager in constructor
* Hud doesn't need scenemanager pointer
* Tile.h doesn't need IrrlichtDevice header (just SMaterial)
* WieldMeshSceneNode: only take scene, we always use scene root node as parent
* Load client-side mods into memory before executing them.
This removes the remaining filesystem access that client-sided mods had and it will hopefully make then more secure.
* Lua Virtual filesystem: don't load the files into memory just scan the filenames into memory.
* Fix the issues with backtrace
* fix most of the issues
* fix code style.
* add a comment
Commit cad10ce3b7 altered the parameter
'float_mount_height' but was missing the necessary line in the constructor
to get the altered value from 'params'.
Fixes 3D floatland terrain generating everywhere.
* MSVC: Fix '/std:c++11' is not a valid compiler option
* MSVC/MINGW: Define 'WIN32_LEAN_AND_MEAN' for the whole project
In some obscure cases 'Windows.h" got includet before that definition, which leaded to compilation warnings+errors
* MSVC: '/arch:SSE' is only available for x86
* MSVC: Fix float conversation
* MSVC/MINGW: use winthreads on Windows
* MSVC: 'USE_CMAKE_CONFIG' might be already definied by CMake build system
* MSVC: Use all available cpu cores for compiling
* Add missing include ctime and use std::time_t
* Add Device3D class which will contain IrrlichtDevice interface
move getSupportedVideoDrivers to Device3D
Add Device3D singleton & use it in various places
Rename Device3D to Rendering engine & add helper functions to various device pointers
More singleton work
RenderingEngine owns draw_load_screen
move draw functions to RenderingEngine
Reduce IrrlichtDevice exposure and guienvironment
RenderingEngine: Expose get_timer_time() to remove device from guiEngine
Make irrlichtdevice & scene manager less exposed
* Code style fixes
* Move porting::getVideoDriverName, getVideoDriverFriendlyName, getDisplayDensity, getDisplaySize to RenderingEngine
Fix XORG_USED macro -> RenderingEngine + create_engine_device from RenderingEngine constructor directly
* enum paralax => enum parallax
The 'absheight' flag was added years ago for the floatlands of 'indev'
mapgen (now deleted). The feature mirrored all ore placement around y = 0
to place ores in floatlands.
In MTG we now use dedicated ore registrations for floatlands.
The feature is crude, inflexible, problematic and very rarely used, it
also makes ore vertical range code more complex.
Minetest 0.5 is a good chance to remove the feature.
The flag itself remains to not break flag values.
The 'absheight' flag was added years ago for the floatlands of 'indev'
mapgen (now deleted). The feature mirrored all ore placement around y = 0
to place ores in floatlands.
In MTG we now use dedicated ore registrations for floatlands.
The feature is crude, inflexible, problematic and very rarely used, it
also makes ore vertical range code more complex.
Minetest 0.5 is a good chance to remove the feature.
The flag itself remains to not break flag values.
Some settings of paramters can cause mgv7 variables to be -inf, nan or -nan.
This can cause massive vertical columns of water to appear above sea level.
As with 'large_cave_depth', lava depth was previously a fixed y value and
therefore incompatible with the ability to shift terrain vertically.
Add 'lava_depth' mapgen parameter to mgflat, mgfractal, mgv5, mgv7.
The value cannot be fixed because we can shift terrain vertically.
This also makes these mapgens consistent with mgflat and mgvalleys which
have 'large_cave_depth' parameters.
When adding items to an empty ItemStack, limit the number of items taken
based on the maximum stack size in the item description.
Likewise, when checking whether items will fit into an empty ItemStack,
only absorb as many items as are allowed in a single stack and return the rest.
* Automatic item and node colorization
Now nodes with a palette yield colored item stacks, and colored items
place colored nodes by default. The client predicts the colorization.
* Backwards compatibility
* Use nil
* Style fixes
* Fix code style
* Document changes
Previously, the carving of rivers was disabled above 'shadow_limit' even if
floatlands were disabled. This caused rivers to be unnecessarily disabled if
mapgen was customised to have surface level above y = 1024.
Previously, maximum spawn level was set to 'water_level + 16'. This would result
in spawn search failing if terrain had been customised to be much higher than
'water_level' at all points.
Also raise spawn level by 1 node to avoid spawning half-buried in a biome 'dust'
node such as 'default:snowblock'.
* C++11 patchset 10: continue cleanup on constructors
* Drop obsolete bool MainMenuData::enable_public (setting is called with cURL in server loop)
* More classes cleanup
* More classes cleanup + change NULL tests to boolean tests
* C++11 patchset 9: move hardcoded init parameters to class definitions
C++11 introduced the possibility to define the default values directly in class definitions, do it on current code
Also remove some unused attributes
* CollisionInfo::bouncy
* collisionMoveResult::collides_xy
* collisionMoveResult::standing_on_unloaded
* Clouds::speed
* More constructor cleanups + some variables removal
* remove only write guiFormSpecMenu::m_old_tooltip
* move header included inside defintions in genericobject.h
* remove some unused since years exception classes
* remove unused & empty debug_stacks_init
* remove unused & empty content_nodemeta_serialize_legacy
* remove forgotten useless bool (bouncy) in collision.cpp code
Previously, when removing decorations we searched upwards and removed until we
found air or water. However, the node above the decoration can be 'ignore' if
a stacked decoration extends into the volume above the mapchunk. The result
could be a problematic column of air placed in the volume of 'ignore'. The
unnecessary placing of air also slows the function.
Add a check for 'ignore' nodes when removing decorations.
Recently we started to remove decorations if the dirt below was flowed away,
but this did not check for stacked decorations, causing them to have only
their lowest node removed.
Also, placed mud could partially bury stacked decorations.
Remove 'old_is_water' bool which on testing is never true.
Add new function 'moveMud()' to reduce indentation.
Remove stacked decoration nodes above a removed decoration.
Remove stacked decorations partially buried in placed mud.
thread_local permits to limit variable lifetime to thread duration. Use it on each setting place which uses static to cache variable result only for thread lifetime. This permits to keep the same performance level & reconfigure server from MT gui in those various variables places.
Add thread_local to undersampling calculation too.
- Allow lua to chose whatever directories or files can be selected
- Fix selecting directories
- Rename dialog to `guiPathSelectMenu` from `guiFileSelectMenu`
- Rename lua function for opening the menu from `show_file_open_dialog` to `show_path_select_dialog`
- Remove duplicate code and fix code style.
Related changes
- fix `clang-format` whitelist.
- Regenerate minetest.conf.example
Previously, findSpawnPos() did not take the 'mapgen_limit' setting into account,
a small limit often resulted in a spawn out in the void.
Use the recently added 'calcMapgenEdges()' to get max spawn range through a new
mapgenParams function 'getSpawnRangeMax()'.
Previously, when a player respawned into a world, 'objectpos_over_limit()' was
used as a check, which was inaccurate.
Use the recently added 'saoPosOverLimit()' to get exact mapgen edges.
Also fix default value of 'm_sao_limit_min'.
Replace the textlist used if the shaders checkbox is unchecked in the settings tab of the main menu with labels. This makes the formspec feel more consistent as the items do not move when shaders is unchecked but only change colour and the checkboxes beside them disappear.
These code be generated by CSM, a modded client or just copy and pasted by the player.
Changes
- Update configuration example and setting translation file.
- Remove colour codes before logging chat.
- Add setting to remove colour codes before processing the chat.
C++11 implement function deleting, it's generally used to prevent some object copy
In script API use this function removal on ScriptApiBase instead of ScriptApiClient/Server/MainMenu, this affect all ScriptApis
Move DISABLE_CLASS_COPY with constructor, the deleted function permit to replace function in its original place
* Implement win32 & win64 builds in Gitlab CI + pkg improvements
* windows buildbot: split build & deploy steps
* move deb artifacts to root folder to have a nicer artifact
* add windows build + packaging on xenial
* Have the server send the player list to the client
Currently the client generates the player list based on the Client active object list, the issue with this is that we can't be sure all player active objects will be sent to the client, so this could result in players showing up when someone run `/status` but auto complete not working with their nick and CSM not being aware of the player
* Move GCC to GCC 6 & GCC 7
* Move Clang to Clang 3.6 & Clang 4.0
* LINT moves from Clang 3.9 to Clang 4.0
* Move XCode 7.3 to 8.0
* Use more travis tricks to install compilers instead of adding complexity to our build script
* Clang format fixes on checked files (compat Cpp11 instead of Cpp03)
* Mingw GCC update from 4.8.4 to 5.3 (Ubuntu Xenial)
* Drop mingw cmake generated files and add them to gitignore
Builtin (the component which contains things like server messages, chat command
descriptions, privilege descriptions) is translated separately; it needs to be
translated by editing a `.tr` text file. See
[Translation](https://dev.minetest.net/Translation) for more information.
## Donations
If you'd like to monetarily support Minetest development, you can find donation
methods on [our website](http://www.minetest.net/development/#donate).
# Maintaining
* This is a concise version of the
[Rules & Guidelines](http://dev.minetest.net/Category:Rules_and_Guidelines) on the developer wiki.*
These notes are for those who have push access Minetest (core developers / maintainers).
- See the [project organisation](http://dev.minetest.net/Organisation) for the people involved.
## Concept approvals and roadmaps
If a Pull Request is not a bug fix:
* If it matches a goal in [the roadmap](../doc/direction.md), then the PR should
be labelled as "Roadmap" and the goal stated by number in the description.
* If it doesn't match a goal, then it needs to receive a concept approval within
a week of being opened to remain open. This 1 week deadline does not apply to
PRs opened before the roadmap was adopted; instead, they may remain open or be
closed as needed. Use the "Concept Approved" label. Issues can be marked as
"Concept Approved" to give preapproval to future PRs.
## Reviewing pull requests
Pull requests should be reviewed and, if appropriate, checked if they achieve
their intended purpose. You can show that you are in the process of, or will
review the pull request by commenting *"Looks good"* or something similar.
**If the pull-request is not [merge-able](#a-pull-request-is-considered-merge-able-when):**
Submit a comment explaining to the author what they need to change to make the
pull-request merge-able.
- If the author comments or makes changes to the pull-request, it can be
reviewed again.
- If no response is made from the author within 1 month (when improvements are
suggested or a question is asked), it can be closed.
**If the pull-request is [merge-able](#a-pull-request-is-considered-merge-able-when):**
Submit a :+1: (+1) or "Looks good" comment to show you believe the pull-request should be merged. "Looks good" comments often signify that the patch might require (more) testing.
- Two core developers must agree to the merge before it is carried out and both should +1 the pull request.
- Who intends to merge the pull-request should follow the commit rules:
- The title should follow the commit guidelines (title starts with a capital letter, present tense, descriptive).
Contributions are welcome! Here's how you can help:
- [Contributing code](#code)
- [Reporting issues](#issues)
- [Requesting features](#feature-requests)
- [Translating](#translations)
- [Donating](#donations)
## Code
If you are planning to start some significant coding, you would benefit from asking first on [our IRC channel](http://www.minetest.net/irc/) before starting.
1. [Fork](https://help.github.com/articles/fork-a-repo/) the repository and [clone](https://help.github.com/articles/cloning-a-repository/) your fork.
2. Start coding!
- Refer to the [Lua API](https://github.com/minetest/minetest/blob/master/doc/lua_api.txt), [Developer Wiki](http://dev.minetest.net/Main_Page) and other [documentation](https://github.com/minetest/minetest/tree/master/doc).
- Follow the [C/C++](http://dev.minetest.net/Code_style_guidelines) and [Lua](http://dev.minetest.net/Lua_code_style_guidelines) code style guidelines.
- Check your code works as expected and document any changes to the Lua API.
3. Commit & [push](https://help.github.com/articles/pushing-to-a-remote/) your changes to a new branch (not `master`, one change per branch)
- Commit messages should:
- Use the present tense
- Have a title which begins with a capital letter
- Be descriptive. (e.g. no `Update init.lua` or `Fix a problem`)
- Have a first line with less than *80 characters* and have a second line that is *empty*
4. Once you are happy with your changes, submit a pull request.
- Open the [pull-request form](https://github.com/minetest/minetest/pull/new/master)
- Add a short description explaining briefly what you've done (or if it's a work-in-progress - what you need to do)
##### A pull-request is considered merge-able when:
1. It follows the [roadmap](https://forum.minetest.net/viewtopic.php?t=9177) in some way and fits the whole picture of the project.
2. It works.
3. It follows the code style for [C/C++](http://dev.minetest.net/Code_style_guidelines) or [Lua](http://dev.minetest.net/Lua_code_style_guidelines).
4. The code's interfaces are well designed, regardless of other aspects that might need more work in the future.
5. It uses protocols and formats which include the required compatibility.
## Issues
If you experience an issue, we would like to know the details - especially when a stable release is on the way.
1. Do a quick search on GitHub to check if the issue has already been reported.
2. Is it an issue with the Minetest *engine*? If not, report it [elsewhere](http://www.minetest.net/development/#reporting-issues).
3. [Open an issue](https://github.com/minetest/minetest/issues/new) and describe the issue you are having - you could include:
- Error logs (check the bottom of the `debug.txt` file)
- Screenshots
- Ways you have tried to solve the issue, and whether they worked or not
- Your Minetest version and the content (subgames, mods or texture packs) you have installed
- Your platform (e.g. Windows 10 or Ubuntu 15.04 x64)
After reporting you should aim to answer questions or clarifications as this helps pinpoint the cause of the issue (if you don't do this your issue may be closed after 1 month).
## Feature requests
Feature requests are welcome but take a moment to see if your idea follows the [roadmap](https://forum.minetest.net/viewtopic.php?t=9177) in some way and fits the whole picture of the project. You should provide a clear explanation with as much detail as possible.
## Translations
Translations of Minetest are performed using Weblate. You can access the project page with a list of current languages [here](https://hosted.weblate.org/projects/minetest/minetest/).
### Donations
If you'd like to monetarily support Minetest development, you can find donation methods on [our website](http://www.minetest.net/development/#donate).
# Maintaining
*This is a concise version of the [Rules & Guidelines](http://dev.minetest.net/Category:Rules_and_Guidelines) on the developer wiki.*
These notes are for those who have push access Minetest (core developers / maintainers).
- See the [project organisation](http://dev.minetest.net/Organisation) for the people involved.
## Reviewing pull requests
Pull requests should be reviewed and, if appropriate, checked if they achieve their intended purpose. You can show that you are in the process of, or will review the pull request by commenting *"Looks good"* or something similar.
**If the pull-request is not [merge-able](#a-pull-request-is-considered-merge-able-when):**
Submit a comment explaining to the author what they need to change to make the pull-request merge-able.
- If the author comments or makes changes to the pull-request, it can be reviewed again.
- If no response is made from the author within 1 month (when improvements are suggested or a question is asked), it can be closed.
**If the pull-request is [merge-able](#a-pull-request-is-considered-merge-able-when):**
Submit a :+1: (+1) or "Looks good" comment to show you believe the pull-request should be merged. "Looks good" comments often signify that the patch might require (more) testing.
- Two core developers must agree to the merge before it is carried out and both should +1 the pull request.
- Who intends to merge the pull-request should follow the commit rules:
- The title should follow the commit guidelines (title starts with a capital letter, present tense, descriptive).
- **Don't forget about IrrlichtMt.** The easiest way is to clone it to `lib/irrlichtmt` as described in the Linux section.
-`curl` is optional, but required to read the serverlist, `curl[winssl]` is required to use the content store.
-`openal-soft`, `libvorbis` and `libogg` are optional, but required to use sound.
-`luajit` is optional, it replaces the integrated Lua interpreter with a faster just-in-time interpreter.
-`gmp` and `jsoncpp` are optional, otherwise the bundled versions will be compiled
There are other optional libraries, but they are not tested if they can build and link correctly.
Use `--triplet` to specify the target triplet, e.g. `x64-windows` or `x86-windows`.
### Compile Minetest
#### a) Using the vcpkg toolchain and CMake GUI
1. Start up the CMake GUI
2. Select **Browse Source...** and select DIR/minetest
3. Select **Browse Build...** and select DIR/minetest-build
4. Select **Configure**
5. Choose the right visual Studio version and target platform. It has to match the version of the installed dependencies
6. Choose **Specify toolchain file for cross-compiling**
7. Click **Next**
8. Select the vcpkg toolchain file e.g. `D:/vcpkg/scripts/buildsystems/vcpkg.cmake`
9. Click Finish
10. Wait until cmake have generated the cash file
11. If there are any errors, solve them and hit **Configure**
12. Click **Generate**
13. Click **Open Project**
14. Compile Minetest inside Visual studio.
#### b) Using the vcpkg toolchain and the commandline
Run the following script in PowerShell:
```powershell
cmake.-G"Visual Studio 15 2017 Win64"-DCMAKE_TOOLCHAIN_FILE=D:/vcpkg/scripts/buildsystems/vcpkg.cmake-DCMAKE_BUILD_TYPE=Release-DENABLE_GETTEXT=OFF-DENABLE_CURSES=OFF
cmake--build.--configRelease
```
Make sure that the right compiler is selected and the path to the vcpkg toolchain is correct.
### Windows Installer using WiX Toolset
Requirements:
* [Visual Studio 2017](https://visualstudio.microsoft.com/)
* [WiX Toolset](https://wixtoolset.org/)
In the Visual Studio 2017 Installer select **Optional Features -> WiX Toolset**.
Build the binaries as described above, but make sure you unselect `RUN_IN_PLACE`.
Open the generated project file with Visual Studio. Right-click **Package** and choose **Generate**.
It may take some minutes to generate the installer.
<stringname="notification_description">Less than 1 minute…</string>
<stringname="ime_dialog_done">Done</string>
<stringname="no_external_storage">External storage isn\'t available. If you use an SDCard, please reinsert it. Otherwise, try restarting your phone or contacting the Minetest developers</string>
style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:48.4785px;line-height:1.25;font-family:'Bitstream Vera Sans';-inkscape-font-specification:'Bitstream Vera Sans';text-align:center;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:#d9d9d9;fill-opacity:1;stroke:#ffffff;stroke-width:1;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:40px;line-height:1.25;font-family:'Bitstream Vera Sans';-inkscape-font-specification:'Bitstream Vera Sans';text-align:center;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:none;fill-opacity:1;stroke:#ffffff;stroke-opacity:1"
d="M 38.099995,186.93332 H 97.36666 l 12.70001,13.36842 v 44.56141 l -12.095255,13.02565 -13.304754,13.71119 5e-6,-16.93334 H 38.1 l -12.7,-12.7 -5e-6,-41.66491 z"
d="M 38.099995,186.93332 H 97.36666 l 12.70001,13.36842 v 44.56141 l -12.095255,13.02565 -13.304754,13.71119 5e-6,-16.93334 H 38.1 l -12.7,-12.7 -5e-6,-41.66491 z"
d="m 332.249,369.02277 c -0.0402,-18.48612 -0.4849,-21.66096 -3.48875,-24.9094 -3.91749,-4.23646 1.11742,-4.01917 -93.12942,-4.01917 h -86.6347 l -20.5311,-20.54025 -20.53109,-20.54025 0.0344,-73.92404 0.0344,-73.92403 20.50131,-21.579 20.50132,-21.57899 106.90272,-0.0281 106.90273,-0.0281 20.77585,21.85532 20.77584,21.85531 v 79.11261 79.1126 l -24.59489,26.35352 c -13.5272,14.49442 -29.74434,31.65707 -36.0381,38.13922 l -11.44321,11.78571 -0.0373,-17.14286 z m -43.95792,-81.07142 v -16.07143 l -72.32143,-0.18197 -72.32143,-0.18198 v 16.43538 16.43537 l 72.32143,-0.18197 72.32143,-0.18198 z m 80,0 v -16.07143 l -32.32143,-0.18585 -32.32143,-0.18585 v 16.44313 16.44312 l 32.32143,-0.18585 32.32143,-0.18585 z M 208.64822,224.02277 v -16.07142 h -32.5 -32.5 v 16.07142 16.07143 h 32.5 32.5 z m 160,0 v -16.07142 h -72.5 -72.5 v 16.07142 16.07143 h 72.5 72.5 z M 288.29108,160.0942 v -16.07143 l -72.32143,-0.18197 -72.32143,-0.18197 v 16.43537 16.43537 l 72.32143,-0.18197 72.32143,-0.18197 z m 80,0 v -16.07143 l -32.32143,-0.18585 -32.32143,-0.18585 v 16.44313 16.44313 l 32.32143,-0.18585 32.32143,-0.18585 z"
style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:40px;line-height:1.25;font-family:'Bitstream Vera Sans';-inkscape-font-specification:'Bitstream Vera Sans';text-align:center;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:none;fill-opacity:1;stroke:#ffffff;stroke-opacity:1"
style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:40px;line-height:1.25;font-family:'Bitstream Vera Sans';-inkscape-font-specification:'Bitstream Vera Sans';text-align:center;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:none;fill-opacity:1;stroke:#ffffff;stroke-opacity:1"
style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:40px;line-height:1.25;font-family:'Bitstream Vera Sans';-inkscape-font-specification:'Bitstream Vera Sans';text-align:center;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:none;fill-opacity:1;stroke:#ffffff;stroke-opacity:1"
style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:40px;line-height:1.25;font-family:'Bitstream Vera Sans';-inkscape-font-specification:'Bitstream Vera Sans';text-align:center;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:none;fill-opacity:1;stroke:#ffffff;stroke-opacity:1"
style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:40px;line-height:1.25;font-family:'Bitstream Vera Sans';-inkscape-font-specification:'Bitstream Vera Sans';text-align:center;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:none;fill-opacity:1;stroke:#ffffff;stroke-opacity:1"
style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:40px;line-height:1.25;font-family:'Bitstream Vera Sans';-inkscape-font-specification:'Bitstream Vera Sans';text-align:center;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:none;fill-opacity:1;stroke:#ffffff;stroke-opacity:1"
d="M 658.56907,-59.664378 A 115.98533,115.98533 0 0 0 548.79351,-108.70519 m 108.73351,-11.03878 1.04205,60.079592 m -1.04205,-60.079592 a 49.685709,49.685709 0 0 0 -92.6985,-23.81259 m 0,0 -16.03501,34.85137"/>
d="m 852.98584,-108.70519 a 115.98533,115.98533 0 0 0 -109.77556,49.040812 m 1.04205,-60.079592 -1.04205,60.079592 m 93.74055,-83.892182 a 49.685709,49.685709 0 0 0 -92.6985,23.81259 m 92.6985,-23.81259 16.03501,34.85137"/>
style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:40px;line-height:1.25;font-family:'Bitstream Vera Sans';-inkscape-font-specification:'Bitstream Vera Sans';text-align:center;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:none;fill-opacity:1;stroke:#ffffff;stroke-opacity:1"
style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:40px;line-height:1.25;font-family:'Bitstream Vera Sans';-inkscape-font-specification:'Bitstream Vera Sans';text-align:center;letter-spacing:0px;word-spacing:0px;text-anchor:middle;fill:none;fill-opacity:1;stroke:#ffffff;stroke-opacity:1"
+ if ((!retry) && (ColorFormat == ECF_A8R8G8B8)) {
+
+ if (!warned) {
+ os::Printer::log("Your driver claims to support GL_BGRA but fails on trying to upload a texture, converting to GL_RGBA and trying again", ELL_ERROR);
+ warned = true;
+ }
+ }
+ else if (retry) {
+ os::Printer::log("Neither uploading texture as GL_BGRA nor, converted one using GL_RGBA succeeded", ELL_ERROR);
description=core.gettext("Clear the out chat queue"),
func=function(param)
core.clear_out_chat_queue()
returntrue,core.gettext("The out chat queue is now empty")
returntrue,core.gettext("The out chat queue is now empty.")
end,
})
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.